Linak DESKLINE XDLB-Serie Bedienungsanleitung Seite 29

Bluetooth
®
Connecting Bluetooth
®
1. The apps are called "Desk Control™" and they have the
following app logo in iTunes and Apple App store,
Google Play store, and Microsoft Store.
2. Press button in the middle for two seconds to
enable pairing mode.
The display on the VXDLR - DPG1C will inform about the
Bluetooth® ID of the desk, which is "DESK" followed by
a four-digit number – look for this ID in the list of "Desks
nearby" in the Desk ControlTM App.
The light strip flashes blue while the desk panel is in pairing
mode.
Reminder
The reminder LED lights through the surface of the VXDLR - DPG1C. The light is intended to indicate the position
of the desk (sitting or standing height). The indication depends on the reminder interval chosen.
Heartbeat (light strip)
The heartbeat reminder is shown as a thin LED light strip. While the user is sitting for an appropriate amount
of time according to the set interval, the light strip calmly pulsates green symbolising a heartbeat. When the
sitting interval runs out, the calm pulsating green turns into fast pulsating orange for one minute hereafter into
static orange to indicate that the user should adjust the desk to standing height. In standing height, the light
strip pulsates green until a potential timeout (standard timeout is four hours).
When the desk is adjusted back to sitting height, the light strip pulsates green until the reminder goes off
again.
Reminder restart
The reminder automatically restarts when the desk is adjusted to sitting height.
Reminder timeout
After four hours without any action, the light strip will time out. When the VXDLR - DPG1C is tilted, the green light
turns back on.
When the light (strip or blocks) is enabled for reminders, the VXDLR - DPG1C is no longer in ZERO™ mode
as long as the light is on/active.
16/38
VXDLR
EN 114065
Reminder intervals
The number of white blocks (one, two or three) each representing an interval.
The three standard intervals are:
- Interval 1: Reminder after 55 minutes sitting
- Interval 2: Reminder after 50 minutes sitting
- Interval 3: Reminder after 45 minutes sitting
The default interval is reminding after 55 minutes, which means one white block lights up.
Adjusting the reminder interval
1. Press button to adjust interval of getting reminded to change position.
2. Toggle through intervals by pressing button.
3. Release button when desired interval is indicated.
When no white blocks are lit up, the reminder is turned off.
Through the app, it is possible to personalise the three intervals to custom values.
Interval 1: Reminder after 55 minutes sitting
Interval 3: Reminder after 45 minutes sitting
17/38
VXDLR
Interval 2: Reminder after 50 minutes sitting
Reminder off
EN 114065