Linak DESKLINE XDLB-Serie Bedienungsanleitung Seite 26

Automatic driving to favourite positions
(only possible for "Full version" with "Automatic drive" enabled in the Desk Control
1. Double-tap VXDLB - DPG1B to let desk adjust automatically
to fi rst position in direction of double-tap.
2. To stop driving of desk between two favourite
positions, simply tap VXDLB - DPG1B once.
Erasing favourite positions
1. Press the button for eight seconds to
erase all saved favourite positions.
After five seconds, the light strip flashes
red when all the favourite positions are erased.
Bluetooth
®
Connecting Bluetooth
®
1. The apps are called "Desk Control™" and they have the
following app logo in iTunes and Apple App store,
Google Play store, and Microsoft Store:
2. Press - button in the middle for two seconds
to enable pairing mode.
The light strip fl ashes blue while the desk panel is in pairing mode.
10/38
VXDLB
App)
TM
EN 114065
Reminder
The reminder LED lights through the surface of the VXDLB - DPG1B. The light is intended to indicate the position
of the desk (sitting or standing height). The indication depends on the reminder interval chosen.
If two favourite positions are saved, they will indicate sitting and standing height. If no favourite positions are
saved, the sitting height will be the lowest possible height and the standing position will be sitting height plus
30 cm.
Heartbeat (light strip)
The heartbeat reminder is shown as a thin LED light strip. While the user is sitting for an appropriate amount
of time according to the set interval, the light strip calmly pulsates green symbolising a heartbeat. When the
sitting interval runs out, the calm pulsating green turns into fast pulsating orange for one minute hereafter into
static orange to indicate that the user should adjust the desk to standing height. In standing height, the light
strip pulsates green until a potential timeout (standard timeout is four hours). When the desk is adjusted back
to sitting height, the light strip pulsates green until the reminder goes off again.
Reminder restart
The reminder automatically restarts when the desk is lowered to sitting height.
Reminder timeout
After four hours without any action, the light strip will time out. When the VXDLB - DPG1B is tilted, the green
light turns back on.
When the light (strip or blocks) is enabled for reminders, the VXDLB - DPG1B is no longer in ZERO™
mode as long as the light is on/active.
Figure 27: Heartbeat - pulsating green light strip
indicates no need to drive desk up
11/38
VXDLB
Figure 28: Heartbeat - pulsating orange light strip
indicates that the user needs to drive his/her desk up
EN 114065