Troubleshooting/Faqs; Desk Control™ App - Linak DESKLINE XDLB-Serie Bedienungsanleitung

Resetting the reminder
1. Press symbol for eight seconds to reset reminder
to default values.
After five seconds the display shows a countdown
and the light strip flashes red when the reminder is reset.
Key lock
The operation of VXDLR - DPG1C can be locked to prevent unintended driving of the desk. As default the key
lock is disabled. If enabled, it automatically locks the VXDLR - DPG1C after a configured amount of time. The key
lock function can also be configured to indicate attempt to operate the locked VXDLR - DPG1C by showing a red
light and a .
Unlocking VXDLR - DPG1C
1. Press , and in sequence (max. one second between each button press).

Troubleshooting/FAQs

Error codes (only VXDLR - DPG1C)
The VXDLR - DPG1C shows error codes generated in the CBD6S in case of errors in the system. The most com-
mon errors loop between the error code (EXX) and the error text, check the codes below:
Error codes Cause
E53-E64 COLLISION
E41-E52 OVERLOAD
E01 INITIALISATION
Software versions before SW 1.13 only show error E01.
Factory reset (only VXDLB - DPG1B and VXDLR - DPG1C)
Press and hold the and buttons for eight seconds to set the DPG to factory default. The LED/light strip
flashes red three times to indicate the reset is done. If a factory reset is performed, it sets the DPG back to
the configured state, i.e. all configurations made in the DPG configurator will not be reset – only the settings
changed directly on the DPG or in the app by the end users will be reset.
VXDLR - DPG1C only
During reset, the display lights up after five seconds, showing an arrow with a countdown [seconds] and RESET
18/38
VXDLR
Figure 42: Reset to factory default
(VXDLB - DPG1B and VXDLR - DPG1C)
EN 114065
Desk Control™ App
The Desk Control™ App is developed for users of sit-stand desks, who want to come one step closer to changing
the prolonged sitting behaviour. Friendly reminders urge you to change position and extensive statistics show
you your daily achievements - all to help you build a healthy routine during the workday. Via the app the desk
can also be adjusted, and the user can drive to pre-stored memory positions.
The app is available for three different platforms: iOS for iPhones and iPads, Android for Android
smartphones and tablets, and a desktop version for Windows 10. The Desk Control™ app comes in
multiple languages, which can be selected in the app.
The app is connected to the desk via Bluetooth
®
Panels VXDLB - DPG1B, or VXDLR - DPG1C.
19/38
wireless technology integrated in either of the LINAK
EN 114065
APP
Desk
®