Linak DESKLINE XDLB-Serie Bedienungsanleitung Seite 28

Operate the desk panel by tilting it.
1. Tilt and hold up VXDLR - DPG1C to drive desk up, press and hold down VXDLR - DPG1C to drive desk down.
2. Release VXDLR - DPG1C when you have reached your requested position.
Desk height limits
In case the desk cannot be operated in its entire span (e.g. a shelf is blocking the upwards movement or a fi ling
cabinet is placed under the desk and blocking the downwards movement), it is possible to set an upper limit
and a lower limit for the desk height.
Note:
It must always be possible to drive the desk to its minimum height in case
initialisation is required.
During initialisation items placed under the desk must be removed.
Setting upper limit
1. Adjust desk to maximum allowable height.
2. Press and tilt VXDLR - DPG1C up at the same time for 8 seconds until light fl ashes.
3. Release and VXDLR - DPG1C.
Setting lower limit
1. Adjust desk to minimum allowable height.
2. Press and press VXDLR - DPG1C down at the same time for 8 seconds until light fl ashes.
3. Release and VXDLR - DPG1C.
Favourite positions
Saving favourite positions 1 and 2
1. Adjust desk to a preferred position.
2. Press button for two seconds.
The light strip flashes white two times to indicate that saving the position is in progress. Not until the light strip
becomes static white, has the position been saved. The display indicates the saved position with a
position number. The number next to the indicates the order in which the positions are saved.
• First position saved: "1" is displayed next to the
• Second position saved: "2" is displayed next to the
14/38
.
.
EN 114065
VXDLR
If the user adjusts the desk to another position and saves this position, it will overwrite the favourite position
(1 or 2) closest to the current position.
Saving favourite positions 3 and 4
1. Press button shortly to make display toggle through the four favourite positions ( with position
number next to it).
2. Toggle through these four favourite positions in display and choose which one to save current position as.
E.g. a user wants to save the current position as favourite position 3:
3. Press the button and toggle to the
4. Press button for two seconds and favourite position is saved.
Note:
Favourite positions 3 and 4 can be disabled via the DPG configurator
(from DPG SW ver. 1.29).
Driving to favourite positions
After saving the favourite positions, the user can reach the positions simply by
tilting/pressing the VXDLR - DPG1C.
1. Tilt/press and hold - when a saved position has been reached, the desk stops.
2. Release VXDLR - DPG1C within one second.
This way the user can easily change between sitting and standing height without looking at the VXDLR - DPG1C
in the meantime. During desk driving, the display will show the height of the desk. When a favourite position has
been reached, the display shows a
The VXDLR - DPG1C stops at all saved favourite positions, which means up to four different positions during the
stroke length of the desk.
When the desk stops at a favourite position, the user can
• keep tilting/presssing the VXDLR - DPG1C for more than one second
or
• release the VXDLR - DPG1C and immediately tilt/press it again.
The desk will move past the favourite position and continue its movement.
Automatic driving to favourite positions
(only possible for "Full version" with "Automatic drive" enabled in the Desk Control
1. Double-tap VXDLR - DPG1C to let desk adjust automatically to first position in direction
of double-tap.
2. To stop driving of desk between two favourite positions, simply tap
VXDLR - DPG1C once.
Erasing favourite positions
and a
1. Press the button for eight seconds to erase
all saved favourite positions.
After fi ve seconds, the display shows a countdown,
and the light strip fl ashes red when
all the favourite positions are erased.
with "3" next to it.
and the position number.
App)
TM
15/38 EN 114065
VXDLR