Parkside PAL 2200 A1 Bedienungs- Und Sicherheitshinweise Seite 5

Cordless work light
zIntroduction
Congratulations on the purchase of your
new device. You have selected a
high-quality product. Please read these
operating instructions thoroughly and carefully.
This manual is part of the product and it contains
important information about its setup and
operation. Always observe all safety instructions.
If you have any questions or are unsure how to
operate the device, please contact your dealer or
service centre. Please keep this manual in a safe
place and pass it on to third parties where
necessary.
zExplanation of symbols
Read the operating instructions!
Direct voltage
Observe warning and safety
instructions!
Danger of death and accidents for
infants and children!
Explosion hazard!
Wear protective gloves!
Dispose of packaging and equipment in
b
an environmentally friendly manner!
a
Environmental damage caused by
incorrect battery disposal!
This symbol indicates that the product
operates with safety extra-low voltage
(SELV / PELV, protection class III).
Not suitable for indoor lighting.
6
zIntended use
The light is suitable for normal use. The light can
withstand extreme physical conditions: Vibrations.
The light is designed for use in workshops or other
work areas, in which it may be subjected to higher
strain. The cordless work light is suitable for
private use only. The light is not suitable for room
lighting in the household. The light is only intended
for use in dry and dust-free rooms.
zDescription of parts
Cordless work light
1
LED (top)
2
COB-LED (inside)
3
ON/OFF switch
4
Charge indicator (3 levels)
5
Micro USB port
6
Magnet
7
Hook
8
Charging station
9
LED indicating readiness for use
10
Micro USB port
1 1
USB charging cable
12
zScope of delivery
1x cordless work light
1x charging station
1x USB charging cable
1x assembly and operating manual