ausdom ANC8 Bedienungsanleitung Seite 4

5. Pairing with Wireless Devices
1). Make sure the headphones is off.
2). Do not place both devices more than 3ft/1m away from
each other.
3). Turn on the Wireless function of your devices.
4). Press and hold the power button on the headphones
until it powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your
headphones is in "pairing mode" waiting to be paired with
your device. You will hear a prompt.
5). Select the ''AUSDOM ANC8'' to pair. Once successfully
paired, the LED turns to solid blue. You will hear a prompt.
Note: Before pairing the headphones with computer, please
make sure your computer or laptop has the built-in Wireless
feature. If not, you must purchase a Wireless dongle,
preferably version 2.1 or above. AUSDOM ANC8 will pair
with the last paired device automatically when turning on.
Because of different systems, some computers or laptops
may need to be manually paired every time.
EN-3