ausdom ANC8 Bedienungsanleitung Seite 3

10 11
1. Microphone
2. 3.5mm Line-in Port
3. Power Button
4. Previous Track/V-
5. Next Track/V+
6. LED Indicator/Charging LED
7. Micro USB Interface for charging
8. ANC LED Indicator
9. ANC Switch
10. Micro USB Charging Cable
11. 3.5mm Audio Cable
4. Charging the Headphone
Use the supplied micro USB charging cable to recharge the
battery. It takes about 1.5 hours for the first charge and after
charging for as long as 1 hours. The headphone LED turns
to solid red during charging. When the battery is fully
charged, the LED turns off.
In order not to affect the charging time, please turn off the
wireless function during charging, but you still can use the
audio cable.
When the battery is low, the LED indicator light blinks red.
At the same time the headphones also provide a low
battery warning tone.
Note: It is strongly recommended fully charging for the first
use. Playtime varies according to volume level and audio
content .
EN-2