Altering Programmed Feeding Times; Deleting Programmed Feeding Times; Cooling - CATSOMAT CA209.01 Bedienungsanleitung

If you open the lid of your CATSOMAT during ongoing operation, the feeding tray will again
rotate following closure, with compartment 1 facing the opening. Although the feeding times
programmed remain stored in the system, it may be necessary to refill empty compartments.

Altering programmed feeding times

In addition to programming new feeding times, you naturally also have the possibility of altering times
already set. To make alterations, kindly select the desired time using the arrow buttons and confirm
your selection with the E-button.
You can now alter the selected feeding time (time and day) as described under "Programming feeding
times". You return to the settings menu via the menu item "Exit".

Deleting programmed feeding times

Feeding times already programmed can be deleted very easily. Simply select the desired time using
the arrow buttons and delete by pressing the C-button. When changing from the 10-compartment to
the 7-compartment feeding tray and given more than 6 programmed feeding times, the last times will
be deleted automatically.

12. Cooling

You can activate or deactivate the cooling of your CATSOMAT and set the desired cooling temperature
under the item "cooling" in the settings menu. In this way, you control the temperature to which the
food is cooled in ongoing operation. In the manufacturer's settings the cooling is activated and a
cooling temperature of +10° Celsius is pre-programmed.
You can select your individual cooling temperature using the arrow buttons and confirm with the
E-button. Setting is possible within a range of 6°C to 20°C. If you confirm your chosen temperature
with the E-button, you automatically return to the settings menu.
Naturally, you can also deactivate the cooling. To do this, select the menu item "off" (follows the
20°C display) using the arrow buttons and confirm with the E-button. Deactivation of the cooling
is automatically accompanied by deactivation of the pre-warming function in order to avoid heat
accumulation. As soon as the cooling is deactivated, both the snowflake symbol and the pre-warming
symbol "H" will no longer be displayed in the information menu.
33