CATSOMAT CA209.01 Bedienungsanleitung Seite 29

Before first use, please clean the whole feeding tray thoroughly with warm water and a little detergent.
Please also clean the surface of the internal tray containing the feeding tray with a soft, moist cloth
and dry it softly after cleaning.
Now, you can fill the necessary chambers of the feeding device with food, which, ideally, has been pre-
cooled in the fridge. Thanks to the many chambers, you can offer your darling a varied, individually
selected menu.
It is imperative that you observe the following notes while filling the feeding trays:
All chambers of the feeding tray are numbered. The respective number of a chamber can
be identified by looking at it from above. As soon as you have activated the CATSOMAT using
the ON/OFF button, the partition will turn chamber no. 1 to face the opening when the lid is
closed, regardless of how you insert the feeding tray after having filled it with food.
Accordingly, food chamber no. 1 will be available to your cat immediately, regardless of the
first feeding time programmed by you. There will be no initial cooling of this chamber.
Depending upon which time was set, the first programmed feeding time will cause chamber
no. 2 to turn to face the feeding tray's opening.
Please make sure to leave at least 1 cm of space to the top of the tray when filling it with
food.
When filling the chambers please also note that the feeding trays are revolved in numerical
order and clock-wise.
Naturally, it is not necessary to fill all food chambers. It is sufficient to equip only those
chambers needed for your programmed feeding times.
Now place the feeding tray without force onto the forwarder (fig. 18). The tray will easily find its
locking point by gently turning it. Under no circumstances turn the feeding tray manually if it has
already been inserted
29