Beko GN163120B Bedienungsanleitung Seite 21

Using the product
1. Economic use
This sign will light up when the freezer
compartment is set to -18°C', the most economical
setting. ( ) Economic use indicator will turn off
when rapid cooling or rapid freezing function is
selected.
2. Power failure/High temperature / error
warning indicator
This indicator ( ) will light up in case of
temperature faults or fault alerts. If you see this
indicator is lit up, please see the "recommended
solutions for problems" section in this guide.
This indicator illuminates during power failure,
high temperature failures and error warnings.
During sustained power failures, the highest
temperature that the freezer compartment reaches
will flash on the digital display. After checking the
food located in the freezer compartment press the
alarm off button to clear the warning.
Please refer to
troubleshooting" section on your manual if you
observe that this indicator is illuminated.
3. Energy saving function (display off)
If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols on
the display other than energy saving symbol will turn
off. When the Energy Saving function is activated, if
any button is pressed or the door is opened, energy
saving function will be cancelled and the symbols
on display will return to normal.
Energy saving function is activated during delivery
from factory and cannot be cancelled.
"remedies advised
4. Rapid cooling
When the rapid cooling function is turned on, the
rapid cool indicator will light up (
compartment temperature indicator will display the
value 1. Push the Rapid cool button again to cancel
this function. The Rapid cool indicator will turn off
and return to normal setting. The rapid cooling
function will be automatically cancelled after 1
hour, unless cancelled by the user. Too cool a large
amount of fresh food, press the rapid cool button
before placing the food in the cooler compartment.
5. Vacation function
To activate the Vacation function, , press the quick
fridge button for 3 seconds; this will activate the
vacation mode indicator (
function is active, the cooler compartment
temperature indicator displays the inscription
"- -" and no cooling process will be active in
the cooling compartment. This function is not
suitable to keep food in the cooler compartment.
for
Other compartments will remain cooled with the
respective temperature set for each compartment.
Push the vacation function button again to cancel
this function.
6. Cooler compartment temperature setting
After pressing the button , the cooler compartment
temperature can be set to 8,7,6,5,4,3,2 and 1
respectively.( )
7. 1 Energy saving (display off)
Pressing this button (
saving sign ( ) and the Energy-saving function
will activate. Activating the energy-saving function
will turn off all other signs on the display. When
the energy-saving function is active, pressing any
button or opening the door will deactivate the
energy-saving function and the display signals will
return to normal. Pressing this button (
will turn off the energy-saving sign and deactivate
the energy-saving function.
7.2 Alarm off
In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button to clear the
warning.
20 / 37 EN
) and the cooler
). When the Vacation
) will light up the energy-
) again
Refrigerator / User Guide