Introduction; Product Description; Intended Use; Symbols On The Product - Kayoba 005018 Bedienungsanleitung

Table of Contents
1 Introduction
1.1 Product description ............................................................26
1.2 Intended use .........................................................................26
1.3 Symbols on the product .................................................26
1.4 Product overview ...............................................................26
2 Safety
2.1 Safety definitions ................................................................ 27
2.2 Safety instructions for operation ............................... 27
2.3 Electrical safety .................................................................. 27
2.4 Safety instructions for maintenance .......................28
3 Assembly
3.1 To install the saddle ..........................................................28
3.2 To install the front wheel ...............................................28
3.3 To install the handlebar tube .....................................28
3.4 To assemble the pedals .................................................28
3.5 To install the battery ........................................................28
4 Operation
4.1 To do before operation .....................................................28
4.2 To charge the battery ......................................................29
4.3 The power assistance .....................................................29
4.4 The brakes ............................................................................29
4.5 The Gears ..............................................................................30
5 Maintenance
5.1 To clean the product .........................................................30
5.2 To lubricate the product .................................................30
5.3 To adjust the brake handles .........................................30
5.4 To adjust the spring tension..........................................31
5.5 To adjust the brake pads ................................................31
5.6 To adjust the gears ............................................................31
5.7 To do a check of the tyre and rims ............................31
5.8 To do a check of the spokes .........................................31
5.9 To do a check of the hub bearings ............................31
5.10 To replace the rear light batteries.............................31
6 Transportation
6.1 Transportation of the battery .........................................31
7 Storage
26
8 Disposal
8.1 To discard the product .....................................................32
26
9 Technical data
1

Introduction

1.1 Product description

The product is an electric bicycle .
27

1.2 Intended use

The product is intended to cycle on the road. Do not use the
product for other tasks. The manufacturer is not liable for
personal injury or damage to the product if it is not used as
intended.
28

1.3 Symbols on the product

Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
This product complies with applicable EU
directives and regulations.
28
Recycle as electrical waste.

1.4 Product overview

30
(Figure 1)
1. Frame
2. Saddle post
3. Saddle
4. Adjustable head
5. Brake handle
6. Gear selector
7. Control panel
8. Bell
9. Bicycle basket
10. Front lamp
31
11. V-brake
12. Front wheel with hub motor
13. Front mudguard
32
14. Pedal
15. Pedal arm
16. Chain
32
32
2022_001