janitza Power Analyser UMG 605-PRO Installationsanleitung Seite 9

Device short description Device short description
3 3
The device is a multifunctional network analyser The device is a multifunctional network analyser
that measures and calculates electrical variables that measures and calculates electrical variables
such as voltage, current, power, energy, such as voltage, current, power, energy,
harmonics, etc. in building installations, on harmonics, etc. in building installations, on
distribution units, circuit breakers and busbar distribution units, circuit breakers and busbar
trunking systems. trunking systems.
Prerequisite: Prerequisite:
Measured voltages and measured currents Measured voltages and measured currents
come from the same network. come from the same network.
The devices supply measurement results that The devices supply measurement results that
can be displayed, saved and transmitted via can be displayed, saved and transmitted via
interfaces. interfaces.
Janitza electronics GmbH
Janitza electronics GmbH
Vor dem Polstück 6 Vor dem Polstück 6
35633 Lahnau / Germany
35633 Lahnau / Germany
Support tel. +49 6441 9642-22
Support tel. +49 6441 9642-22
info@janitza.com | www.janitza.com
info@janitza.com | www.janitza.com
   
NOTE! NOTE!
L1 L1 L1 L1
For further information on device functions, data and assembly, see the user manual. For further information on device functions, data and assembly, see the user manual.
L2 L2 L2 L2
L3 L3 L3 L3
N N
Network systems
5 Network systems
5
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
I L L L L L N L I N I L I I L I L L I L N L
2 3 4w 2i 1 4w 2i 2 1 3 2 3 3w 3m 1 2 1 3w 3m 1 3 2 2 1 3 3 2 3
Suitable network systems and maximum rated voltages (DIN EN 61010-1/A1):
Suitable network systems and maximum rated voltages (DIN EN 61010-1/A1):
Setting range on the device: Address 110 (see step 13) Setting range on the device: Address 110 (see step 13)
Three-phase four-conductor Three-phase four-conductor
Three-phase four-conductor
systems with earthed neutral systems with non-earthed neutral
systems with earthed neutral
conductor
conductor
L1 L1 L1 L1
L1 L1 L1
L2 L2 L2 L2
L2 L2 L2
L1 L1 L1 L1
L1 L1 L1 L1
L1 L1
L1 L1
L2 L2 L2 L2 L1 L1 L1
L2 L2 L2 L2 L1 L1 L1
L2 L2
L2 L2
L3 L3 L3 L3 L3 L3 L3 L3
N L2 N L2 L2 N N L2
L2 N N L2 N
L3 L3
L3 L3
N N
N N
N
N N N N N
L3 L3 L3 L3
L3 L3 L3
E E E E E E E E E E
E E E E E E E
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 L3
I I I I I L L L L L N L I N I L I S1 S2 S1 S2 S1 S2 I L I L L3 L S1 S2 S1 S2 S1 S2 I L3 L N L3 L3 L L3
2 I 1 3 3 I I 2 I 4w 2u 3 I 1 4w 2u 2 1 3 L 2 L L 3 U L L 3w 2u 1 L L N 2 / U L L 1 L 3w 2u 1 3 L N I 2 2 N L I 1 3 3 I N I I 2 I I 3 I
2 3 1 2 3 3w 2i 3w 3m 1 3w 2i 2 3w 3m 1 1 3 2 2 1 3 U 3 2 1 / U 3 2 1 1 3 2 2
L L L L L N L I N I I I L-N I I L-L
4w 2i 1 4w 2i 2 1 3 2 L 3 1 L 2 L L 1 3 L N 2 L I 3 L-N N I L-L I I I
3w 3m 1 3w 3m 2 3 1 2 3 1 2 1 3 2
E E E E E E E E
E E E E E E
277 VLN / 480 VLL 277 VLN / 480 VLL
Address 110 - Set.: 0004 Address 110 - Set.: 0004
Measurement in the three-phase three- Measurement in the three-phase three-
Single-phase two-conductor
conductor system with asymmetric loading. conductor system with asymmetric loading.
Two-phase two-conductor Two-phase two-conductor
L1 L1 L1 L1
L1 L1 L1
systems with earthed neutral
systems, not earthed
systems, not earthed
L1 L1 L1 L1
L1 L1
L1 L1 L1 L1
L1 L1
L1 L1 L1
L1 L1 L1
L2 L2 L2 L2
L2 L2
L2 L2 L2 L2
L2 L2
L3 L3 L3 L3
L3 L3
L3 L3 L3 L3 L3 L3
N N
L2 L2 L2 L2
L2 L2 L2
E E E E E E E E E E E E E E E
S1 S2 S1 S2 S1 S2
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
3w 2u 3w 2u
L2 L2 L2
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 L2 L2 L2
S1 S2 S1 S2 S1 S2 I I I S1 S2 S1 S2 S1 S2 I S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
I 1 3 I I 2 I 3 I hv L hv L L L L L L N L L L L I N N L I I I N I I I I
2 1 3 2 3 3w 2u 1 2 1 3w 2u 1 3 2 2 1 3 3 1 2 2 3 1 1 3 2 2
I I I N I I L I I L I L L I L L N L L I L L N I L N L I I L L I I N L L I I L N I I L I I N I I I I
3 2 4w 2u 3 1 3 2 1 4w 2u 1 3 3w 2i 2 2 1 3 3 1 2 3w 2i 2 L 3 3w 2i 1 1 3 L 2 2 L L 1 3w 2i 1 3 3 L 2 N 1 2 L 1 3 2 I 3 N 2 1 3 I 3 2 I 1 I 3 I 2 3w 2m 1
3w 2u 1 3w 2u E E 2 E 3 1 2 3 1 E E 2 E 1 3 2
E E E E E E
U
U
L-L L-L
Address 110 - Set.: 0007 Address 110 - Set.: 0007
480 VLL
480 VLL
Measurement in the three-phase three- Measurement in the three-phase three-
conductor system with asymmetric loading. conductor system with asymmetric loading.
L1 L1 L1 L1
L2 L2 L2 L2
L3 L3 L3 L3
Power Analyser
Power Analyser
UMG 605-PRO Assembly Assembly
UMG 605-PRO
Installation manual The device will be installed in switch cabinets or The device will be installed in switch cabinets or
Installation manual
in small installation distributors per DIN 43880 in small installation distributors per DIN 43880
on a 35 mm mounting rail per DIN EN 60715. It on a 35 mm mounting rail per DIN EN 60715. It
can be installed in any position. can be installed in any position.
Installation Installation
 
Device settings
Device settings


m m m m
Damage to property due to Damage to property due to
disregard of the installation disregard of the installation
instructions instructions
CAUTION! CAUTION!
Disregard of the installation instructions can Disregard of the installation instructions can
damage or destroy your device. damage or destroy your device.
Ensure that you have enough air circulation Ensure that you have enough air circulation
in your installation environment and in the in your installation environment and in the
event of high environmental temperatures, event of high environmental temperatures,
provide cooling if necessary. provide cooling if necessary.
L1 L1
L1 L1
L2 L2
L2 L2
L3 L3 L3 L3
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
I N I I I I I L L L L L N L I N I I I
1 2 1 3 2 3 3w 2i 1 3w 2i 2 1 3 2 3 1 2 L 1 3 L
3w 3m 1 3w 3m 2
Three-phase four-conductor
Three-phase four-conductor
Three-phase four-conductor
systems with non-earthed neutral
systems, not earthed
systems, not earthed
conductor (IT networks)
conductor (IT networks)
Three-phase three-conductor system Three-phase three-conductor system
L1 L1 L1 L1 L1 L1 L1 L1
L1 L1 L1 L1 L1 L1 L1 L1
L2 L2 L2 L2
L2 L2 L2 L2 L2
L1 L1
L1 L1 L1 L1 L1 L1 L1
L1 L1 L1
L1 L1 L1 L2 L2 L1 L1 L1
L2 L2 L2 L2 L1 L1 L1 L2 L2 L2 L1 L1 L1
L2 L2 L2
L3 L3 L3 L3 L3 L3 L3 L3 L3
N L2 N L2 N L2 N L2
N N L2 N L2 N N
L3 L3 L3
N
N N N N N
R R R R
R R R R
L2 L2 L2 L2
L2 L2 L2
L3 L3 L3 L3 L3 L3 L3 L3
L3 L3 L3 L3 L3 L3 L3 L3
R
R R R
R R
E E E E E E E E E E L2 E E E E E
E E E E E E E E E E E E E L2 L2 E L2 L2 E L2 E
S1 S2 S1 S2 S1 S2 3w 2u 3w 2u S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
3w 2m
L3 L3
I N I I I I I L3 L3 L3 L3 L L3 S1 S2 S1 S2 S1 S2 L L L S1 S2 S1 S2 S1 S2 L N L I L3 N L3 I I I L3 L3 L3
I 1 I I 2 U I 1 3 / U 2 L 3 L L L L hv L N L L L L 1 I hv N L N 2 I L 1 3 I I I U N 2 I I 3 I I I 1 I 2 L I 1 3 L
1 3 3 2 3w 2m 3 U 3w 2m 1 3w 2i 2 / U 1 3 1 3w 2i 2 2 3 1 3 1 2 2 3 1 3 1 2 2 3w 2u U 1 3 3 2 1 3w 2u hv 3 2
L-N L-L L-L
I L L-N L L L L-L L N L I N I I I I I L-L
3 3w 2i 1 3w 2i 2 1 3 2 3 1 2 1 3 2 3 3w 2m
E E E E E E E E E E E
E E E E E E E E E E E E
277 VLN / 480 VLL 277 VLN / 480 VLL 480 VLL 480 VLL
Address 110 - Set.: 0005 Address 110 - Set.: 0005 Address 110 - Set.: 0006
Measurement in the three-phase three- Measurement in the three-phase three- Measurement in the three-phase three- Measurement in the three-phase three-
Single-phase two-conductor Separated single-phase three- Separated single-phase three-
conductor system with asymmetric loading. conductor system with asymmetric loading. conductor system with asymmetric loading. conductor system with asymmetric loading.
L L L L L1 L1 L1 L1
L1 L L L L L1 L1
systems with earthed neutral conductor systems with earthed conductor systems with earthed
conductor conductor neutral conductor neutral conductor
L1 L1 L1 L1 L1
L1 L1 L1 L1 L1 L1
L1 L1 L1
L L L L1 L1 L1
L L L L1 L1
L2 L2
L2 L2 L2 L2 L2 L2
L2 L2
L3 L3 L2
L3 L3 L3 L3 L3 L3 L3 L3
N N N N
N N
N N
N
N N N N
N
N N N N L2 L2 L2 L2
L2 N N N N L2 L2
E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
3w 2u 3w 2u
N N N L2 L2 L2
N N N L2 L2
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 3w 2m 3w 2m
I I I 3w 2u I L 3w 2u hv L L L L hv L L N L L L I L N N I L I I I N I I I I I I I
1 3 3 2 2w 1m 3 2w 1m 1 2 1 1 3 2 2 1 3 3 1 2 2 3 1 1 3 2 2 3 1 3 2 2w 2m 3
I L I L L L L N L L L I N L L I L N I I L I I N I I I I I I L L
I 3 2 3w 2m 1 3 2 3w 2m L 1 3 L 2 3w 2m 1 L L 3 2 L 1 N 3 1 L 2 2 I 1 3 N 3 I 2 1 I I 3 2 I 1 3 I hv 2 3 1 hv 2
E E 3 E hv 1 hv E 2 E E 1 3 2 3 E E 1 E 2 1 3 2 3 E E E 2w 1m
E E E E E E E E E E E
U U / U
U U / U
L-N L-N L-N L-L L-N L-L
Address 110 - Set.: 0013
Address 110 - Set.: 0012 Address 110 - Set.: 0012
480 VLN 277 VLN / 480 VLL
480 VLN 277 VLN / 480 VLL
Measurement in the three-phase three- Measurement in the three-phase three-
Measurement in the three-phase three- Measurement in the three-phase three-
conductor system with asymmetric loading. conductor system with asymmetric loading.
system with asymmetric loading.
L1 L1 L1 L1 L1 L1
L2 L2
N N N N
General
1
1
Connecting the supply voltage
4 4
Disclaimer
The observance of the information products
The supply voltage level for the device is specifi ed
for the devices is a prerequisite for safe opera-
on the rating plate.
tion and to achieve the stipulated performance
After connecting the supply voltage, an indication
characteristics and product characteristics.
is shown on the display. If no indication appears,
Janitza electronics GmbH accepts no liability
check whether the supply voltage is within the
Fig. Device on Fig. Device on
for injuries to personnel, property damage
rated voltage range.
mounting rail in mounting rail in
or fi nancial losses arising due to a failure to
accordance with accordance with
comply with the information products. Ensure
DIN EN 60715. DIN EN 60715.
that your information products are accessible
and legible.
Further information can be found on our web-
site www.janitza.com at Support > Downloads.
Copyright notice
User manual:
User manual:
© 2017 - Janitza electronics GmbH - Lahnau.
All rights reserved. Duplication, editing,
Fig. Connecting Uh supply voltage.
distribution and any form of exploitation, also
as excerpts, is prohibited.
Subject to technical amendments
• Make sure that your device agrees with the
• Read and understand fi rst product-related
L1 L1 L1 L1 L1
L1 L1
L2 L2 L2 L2 L2
L2 L2
L3 L3 L3 L3 L3 L3 L3
6 Voltage measurement
6
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 3w 2m
I I L L L L L L L N L L L I L N N I L I I I N I I I I I I I L
2 L L 3w 3m 3 L N 3w 2m L 3w 3m 1 I N 2 I 1 3w 2m 1 3 I I 2 2 I 1 3 3 I 1 2 2 3 1 1 3 2 2 L 1 3 3 L 2 L L 3 3w 2i L N L
1 3 2 3 1 2 1 3 2 3 3w 2i 1 3w 2i 2 1 3 2 The device only determines measured values if
measured voltage of >10 Veff is present on at
Setting range on the device: Address 110 (see step 13)
Three-phase four-conductor
Three-phase four-conductor least one voltage measurement input.
systems with earthed phase
systems with earthed phase
L1 L1 L1 L1
L1 L1 L1 L1 L1
L1 L1 L1 L1 L1
L1 L1 L1 L1 L1 L1 L1
L1 L1 L1
L2 L2 L1 L1 L1 L2
L2 L2 L2 L1 L1 L1 L2 L2 L2 L2
L2 L2 L2 CAUTION!
L3 L3 L3 L3 L3 L3 L3 L3 L3 L3
L3 L3 L3
N N
Failure to observe the connection conditions
for the voltage measurement inputs can cause
L2 L2 L2 L2 injuries to you or damage to the device.
L2 L2 L2 L2 L2
L3 L3 L3 L3
L3 L3 L3 L3 L3
Therefore, note the following:
E E E E E L2 E E
E E E E E L2 L2 E L2 L2 E L2 E E
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 3w 2u
3w 2m 3w 2u 3w 2u 3w 2m 3w 2m
L3
I I L L L L L3 S1 S2 S1 S2 S1 S2 L L3 L L N L L L3 L3 S1 S2 S1 S2 S1 S2 L L3 L I N N I L I I I N I I I I I I I L
2 L L L 3w 2u 3 L L N L L L L 2w 1m 1 3w 2u U I L L N N 2 L L I L 2w 1m 1 1 3 I L I I N N 2 2 I L I 1 3 3 I I I N I 1 2 I I 2 3 I I I 1 3 1 I 2 2 3w 2m L I 1 3 3 L 2 3w 2m L L 3 hv L N L L 2w 2m
3w 2m 1 1 3 hv 2 2 1 3w 2m 1 3 3 1 2 2 2 1 3 3 U 1 1 3 2 2 2 3 1 1 3 3 2 2 1 3 3 hv 2 1 3 hv 2 hv 3 1 2 1 3 hv
L-L
L L L L L N L I N L-L I I I I I L L L L
1 3w 2m 2 1 3 2 3 1 2 1 3 2 3 hv 1 hv 2 1 3
E E E E E
E E E E E E
480 VLL 480 VLL
Address 110 - Set.: 0006
Measurement in the single-phase three-con-
The device can be used in
The device can be used in
I3 and U3 are not calculated and set to zero.
L1 L1
• 2-, 3- and 4-conductor • 2-, 3- and 4-conductor
L1 networks (TN, TT and L1 L1 L1 L1
networks (TN, TT and
L1 L1  
L1 L1 L1
L1
IT networks)
L2 L2 IT networks)
L2 L2 L2
L3 L3 L2 L2
N • domestic and N
N • domestic and N
N
industrial settings
industrial settings
N
. .
L2 L2
E E
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
L2
3w 2m 3w 2m S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2  
L L L L L L L N L L L L I N N L I I I N I I I I I I I I L
2w 1m 1 2w 2m 2 1 2w 1m 1 3 2 2 3 1 3 1 2 2 3 1 3 1 2 2 1 3 3 2 3 2w 2m 1 2w 2m
L L L N L L L I N L L I L N I I L I I N I I I I I I
L hv 1 3 L 2 1 L L hv 3 2 L N 1 3 1 L 2 I 2 N 3 1 I 3 2 1 I I 3 2 I 1 3 I 2 3 L L L L
1 2w 1m 2 1 3 2 3 1 2 1 3 2 3 2w 2m 2w 2m 1 2 3 1
E
Address 110 - Set.: 0013
conductor conductor
system with asymmetric loading.
L1 L1
9 / 14
L2 L2
General
Connecting the supply voltage
Disclaimer
The observance of the information products
The supply voltage level for the device is specifi ed
for the devices is a prerequisite for safe opera-
on the rating plate.
tion and to achieve the stipulated performance
After connecting the supply voltage, an indication
characteristics and product characteristics.
is shown on the display. If no indication appears,
Janitza electronics GmbH accepts no liability
check whether the supply voltage is within the
for injuries to personnel, property damage
rated voltage range.
or fi nancial losses arising due to a failure to
comply with the information products. Ensure
Fuse Fuse
that your information products are accessible
and legible.
Circuit breaker Circuit breaker
Further information can be found on our web-
site www.janitza.com at Support > Downloads.
Copyright notice
© 2017 - Janitza electronics GmbH - Lahnau.
All rights reserved. Duplication, editing,
Fig. Connecting Uh supply voltage.
distribution and any form of exploitation, also
as excerpts, is prohibited.
c c c c
Subject to technical amendments
Risk of injury due to electric Risk of injury due to electric
• Make sure that your device agrees with the
voltage! voltage!
WARNING! WARNING!
installation manual.
installation manual.
Severe bodily injuries or death can occur due to: • Read and understand fi rst product-related Severe bodily injuries or death can occur due to:
documents.
• touching bare or stripped wires that are live. • touching bare or stripped wires that are live. documents.
• device inputs that are dangerous to touch. • device inputs that are dangerous to touch.
De-energise your device before starting De-energise your device before starting
work! Check that it is de-energised. work! Check that it is de-energised.
L1 L1 L1 L1 L1
L1 L1
L2 L2 L2 L2 L2
L2 L2
L3 L3 L3 L3 L3 L3 L3
Voltage measurement
S1 S2 S1 S2 S1 S2 3w 2m S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
L L L L L L N L L L L N I N L I I N I I I I I I I I I L L L L L N
1 hv 3w 2i I N 2 I 1 hv 1 3 I 2 I 2 I 1 3 3 I 2 1 3 2 1 1 3 2 L 2 1 3 L 3 2 L L 3w 2m 3 L N L 1 3w 2m I N 2 I 1 3 I I 2
3 1 2 1 3 2 3 3w 2m 3w 2m 1 2 1 3 2 3 1 2 1 3
The device only determines measured values if
measured voltage of >10 Veff is present on at
Setting range on the device: Address 110 (see step 13)
least one voltage measurement input.
Single-phase three-conductor system Single-phase three-conductor system Three-phase four-conductor system Three-phase four-conductor system
m m
m m
Risk of injuries or damage to
Risk of injuries or damage to
L1 L1 L1 L1 L1
L1 L1
the device the device
L2
CAUTION!
L2 L3 L2
N N N N
Failure to observe the connection conditions
for the voltage measurement inputs can cause
injuries to you or damage to the device.
Therefore, note the following:
• The voltage measurement inputs
• The voltage measurement inputs
3w 2u S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
L L S1 S2 S1 S2 S1 S2 L L L L N L L S1 S2 S1 S2 S1 S2 L I L N N I L I I I N I I I I I I I L L L L L N
1 L I hv N 2 L L I 1 2w 2m 1 3 L N I I 2 2 L I 1 3 I 3 N I 1 2 I 2 3 I I 1 1 3 I 2 2 L I 1 3 L 3 2 L L 2w 1m 3 L N L 1 2w 1m I N 2 I 1 3 I I 2
2 1 1 3 2 1 2 3 3 2 1 3 2 2w 1m 1 3 2 2w 1m 1 3 2 1 3 2 3 1 2 1 3
• must not be occupied with DC voltage.
• must not be occupied with DC voltage.
L N L I N I I I I I
2 3 1 2 1 3 2 3
• must be provided with a suitable,
• must be provided with a suitable,
Address 110 - Set.: 0008 Address 110 - Set.: 0008
Address 110 - Set.: 0009 Address 110 - Set.: 0009
labelled fuse that is positioned close by
labelled fuse that is positioned close by
Measurement in the single-phase three-con-
Measuring one phase in three-phase Measuring one phase in three-phase
ductor system. ductor system.
and a circuit breaker (alternatively:
and a circuit breaker (alternatively: four-conductor system four-conductor system
I3 and U3 are not calculated and set to zero.
a line safety switch).
a line safety switch).
• are dangerous to touch.   • are dangerous to touch.
NOTE! NOTE!
• Voltages that exceed the permissible
• Voltages that exceed the permissible
• If the measurement range is exceeded, • If the measurement range is exceeded,
network rated voltages must be connected
network rated voltages must be connected
the measurement device display shows the measurement device display shows
via a voltage transformer.
via a voltage transformer.
"EEEE". "EEEE".
• Measured voltages and currents must
• Measured voltages and currents must
• For further information on the baseline • For further information on the baseline
derive from the same network. derive from the same network.
measurement, see the user manual. measurement, see the user manual.
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
• A supporting measurement via input • A supporting measurement via input
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
L L L   L N L I N I I I I I
2 NOTE! 1 3 2 3 1 2 1 3 2 3
NOTE!
L N L I N I I I I I
2 3 1 L4 is confi gured via address 111 on 2 1 3 L4 is confi gured via address 111 on 2 3
As an alternative to the fuse and circuit
As an alternative to the fuse and circuit
the device. For settings, diagrams and the device. For settings, diagrams and
breaker, you can use a line safety switch.
breaker, you can use a line safety switch.
information on supporting.measurement, information on supporting.measurement,
see the user manual. see the user manual.
• Keep product supporting documentation
• Keep product supporting documentation
throughout the life available and, where ap-
throughout the life available and, where ap-
Damage to property due to Damage to property due to
propriate, to pass on to subsequent users.
propriate, to pass on to subsequent users.
m m m m
not observing the connection not observing the connection
• Please inform yourself about device revisi-
• Please inform yourself about device revisi-
conditions or impermissible conditions or impermissible
ons and the associated adjustments to the
ons and the associated adjustments to the
CAUTION! CAUTION!
overvoltages overvoltages
product-related documentation on product-related documentation on
www.janitza.com.
www.janitza.com.
Your device can be damaged or destroyed Your device can be damaged or destroyed
by a failure to comply with the connection by a failure to comply with the connection
Disposal
Disposal
conditions or by exceeding the permissible conditions or by exceeding the permissible
Please observe national regulations!
Please observe national regulations!
voltage range. voltage range.
If disposing of individual parts, please dispose If disposing of individual parts, please dispose
Before connecting the device to the supply Before connecting the device to the supply
of them in accordance with their nature and
of them in accordance with their nature and
voltage, note the following: voltage, note the following:
existing country-specifi c regulations, for
existing country-specifi c regulations, for
• The voltage and frequency must meet the • The voltage and frequency must meet the
example as:
example as:
specifi cations on the rating plate! Adhere specifi cations on the rating plate! Adhere
• Electrical scrap
• Electrical scrap
to the threshold values as described in to the threshold values as described in
• Plastics • Plastics
the user manual! the user manual!
• Metals
• Metals
• In building installations, the supply • In building installations, the supply
Or, task a certifi ed disposal business with the
Or, task a certifi ed disposal business with the
voltage must be protected with a UL/ voltage must be protected with a UL/
scrapping.
scrapping.
IEC approved circuit breaker / a fuse! IEC approved circuit breaker / a fuse!
• The circuit breaker • The circuit breaker
Relevant laws, applied standards and
Relevant laws, applied standards and
• must be easily accessible for the user • must be easily accessible for the user
directives
directives
and be installed close to the device. and be installed close to the device.
The laws, standards and directives for the The laws, standards and directives for the
• must be labelled for the relevant • must be labelled for the relevant
device applied by Janitza electronic GmbH
device applied by Janitza electronic GmbH
device. device.
can be found in the declaration of conformity
can be found in the declaration of conformity
• Do not connect the supply voltage to the • Do not connect the supply voltage to the
on our website.
on our website.
voltage transformers. voltage transformers.
L1 L1
L1 L1
L2 L2
L2 L2
L3 L3 L3 L3
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 3w 2m 3w 2m S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
3w 2m 3w 2m
L I N I I I I I L L L L L N L I N I
I 3 I 1 2 1 3 2 L 3 L L L hv L N L 1 I hv N 2 I 1 3 I I 2 I 3 I 1 2
2 3 "Voltage measurement in three-phase four- hv "Voltage measurement in three-phase four- 1 hv 2 1 3 2 3 1 2 1 3 2 3
conductor system", without voltage transformer
conductor system", without voltage transformer
connection variant.
connection variant.
L1 L1
L1 L1
L2 L2 L2 L2
Circuit breaker
Circuit breaker
Fuse
Fuse
(UL-/IEC-listed)
S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 (UL-/IEC-listed) S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
PE
L I N I I I I I L L L L L N L I N I
I 3 I 1 2 1 3 2 L 3 L L L 2w 2m L N L 2w 2m 1 I N 2 I 1 3 I I 2 I 3 I 1 2
2 3 2w 2m 1 2w 2m 2 1 3 2 3 1 2 1 3 2 3
N
L3
L2
L1
   
RECOMMENDATION RECOMMENDATION
The voltage measurement inputs are designed The voltage measurement inputs are designed
Connect the protective earth (PE) to Connect the protective earth (PE) to
for measurements in low voltage networks, in
for measurements in low voltage networks, in
measurement input L4 for a PE/N measurement input L4 for a PE/N
which rated voltages of up to
which rated voltages of up to
measurement. Do not use a green and measurement. Do not use a green and
• 277 V phase to earth and 480 V phase to
• 277 V phase to earth and 480 V phase to
yellow wire for this as the conductor yellow wire for this as the conductor
phase in the 4-conductor system or
phase in the 4-conductor system or
does not have any protective function! does not have any protective function!
• 480 V phase to phase in the 3-conductor • 480 V phase to phase in the 3-conductor
(See fi g. "Connection variant in three- (See fi g. "Connection variant in three-
system
system
phase four-conductor system" in step 6). phase four-conductor system" in step 6).
occur.
occur.
The measurement and surge voltages meet
The measurement and surge voltages meet
overvoltage category 300 V CATIII.
overvoltage category 300 V CATIII.
2
2
7
7
I I I I
1 3 2 3
S1 S2 S1 S2 S1 S2
PE
I I I I
3 1 2 3
N
L3
L2
L1