Comelit Ultra UT9270 Programmieranleitung Seite 24

To load a screensaver image, right-click in the box on the right and select the "Load" menu; select the desired
image using the window shown.
Note
• Compatible formats are .jpg, .jpeg, .png.
The compatible size is 480 x 800 pixel
MAINTENANCE
Restarting the device
To restart the Touch module:
1. select it
2. right-click on the description (a pop-up with 5 sub-menus will appear)
3. select "Restart device" or
4. click which appears on the menu bar
Resetting the device
To restore the factory settings of the Touch module:
1. select it
2. right-click on the description (a pop-up with 5 sub-menus will appear)
3. select "Reset device" (an alert/confirm procedure request window appears)
Updating device firmware
To update the Touch module firmware:
1. select it
2. right-click on the description (a pop-up with 5 sub-menus will appear)
3. select "Download firmware" or
4. click which appears on the menu bar
We recommend using a micro-USB or Ethernet connection to update the device firmware
Saving the configuration
To save the Touch module configuration:
1. select it
2. right-click on the description (a pop-up with 5 sub-menus will appear)
3. select "Save configuration"
4. select the location in which to save the file "UT9270 - Touch screen module ULTRA--.tar.gz"
We recommend using a micro-USB or Ethernet connection to save the device configuration
24