Initial Start-Up; Switching The Product On/Off; Switching The Led Light On/Off; Mode Selection - Silvercrest SKR D1 C3 Bedienungs- Und Sicherheitshinweise

˜ Initial start-up
You can also set up the product on a level
surface . So as not to cover the ventilation
slots and loudspeaker
the product, you must fold out the adjustable
foot of the product .
13 ] [
Connect the coaxial power connector of the
power adaptor
20 ] [
port .
11 ] [
Plug the power adaptor into a properly
installed mains socket .
The product first displays a fictitious date and
time 00:00 .
A DAB station search is started in the
background .
The date and time are set automatically .
After this installation routine, the product is in
standby mode .
˜ Switching the product on/off
Fully lay out the antenna
Switching the product on / off
Switching on
Press
Switching off
Press
(off = standby mode)
˜ Switching the LED light on/off
Switching the LED light on: Briefly press
button .
5 ] [
Switching the LED light off: Briefly press
button again .
[ 5 ]
NOTES:
The LED light is located underneath the
14 ] [
product .
If the LED light is not switched off
[ 14 ]
manually, it will switch off automatically after
120 minutes .
14 GB
on the bottom of
15 ] [
to the power adaptor
.
12 ] [
3 ] [
again
3 ] [
˜ Mode selection
During operation, press the MODE button
shortly to switch between FM and DAB
operation .
˜ Volume adjustment
Volume
VOLUME/START/RESET
Increase Turn to the right
(clockwise direction)
Decrease Turn to the left
(counter-clockwise direction)
˜ System settings
Press and hold MENU/INFO
the menu .
Turn SELECT/ENTER/SNOOZE
<SYSTEM> .
Push SELECT/ENTER/SNOOZE
confirm .
Turn SELECT/ENTER/SNOOZE
from:
2 ] [
7 ] [
to display
8 ] [
to select
1 ] [
to
1 ] [
to select
1 ] [