Initial Use; Switching The Product On And Off - Silvercrest SDRF 10 B1 Bedienungs- Und Sicherheitshinweise

Insert four batteries type 1.5 V LR6 AA. Ensure correct polarity.
Note the markings inside the battery compartment
Reinstall the battery cover until you hear it lock into place to close
the battery compartment
Note: To see the battery status, press the Menu / Info button
the colour LCD
tion in the colour LCD

Initial use

Switching the product on and off

The product will only display the clock, date and alarm times in standby
mode when using the product with the power supply
powered, the colour LCD
on with the
Switching on / off on mains power:
Fully extend the antenna
Set the main switch
position. The product is now in standby mode. The colour LCD
shows the current date and time, as well as the alarm settings for
alarm 1 and alarm 2.
Press the
product for the first time it will automatically scan for DAB+ stations
after being switched on. The progress bar in the colour LCD
dicates the progress of the DAB+ station scan. The number above
the progress bar indicates how many DAB+ stations have been found.
After the DAB+ station scan has completed, the product will select
the first available DAB+ station and start playing it. By default, the
DAB+ stations are listed in numerical and alphabetic order.
.
6
several times (see chapter "Displaying informa-
1
"). The battery level is shown in percent.
1
will be blank until the product is switched
1
button .
8
for good reception.
7
on the right side of the product to the "On"
3
button to switch on the product. When using the
8
.
6
on
9
. When battery
15
1
in-
1
GB/IE 67