Signalisation - Simons Voss Technologies SmartLocker AX Kurzanleitung

6. Signalisation

6 Signalisation
Signal
1× Beeping
2× Beeping und Flashing (green)
3 × Beeping
3× Beeping and Flashing
4 × Beeping and Flashing
42 / 124
5. Push the lid against the case and push it in the dir-
ection of the short flap until it snaps in.
35
6. Use the same procedure for the other battery.
SmartLocker AX beeps three times.
9
Batteries are changed.
9
IMPORTANT
Varying behaviour due to rechargeable batteries
Rechargeable batteries discharge differently com-
pared to batteries. Using rechargeable batteries results
in varying battery life and faulty battery warnings.
Avoid using rechargeable batteries.

NOTE
Emergency supply if totally discharged
If you ignore the battery warnings, the SmartLocker AX
may fail to open. If this happens the battery compart-
ment is no longer accessible. You may connect an
emergency power supply for changing the batteries.
Explanation
Lock locked.
Lock unlocked.
Reset/Battery change.
Motor unit and reader connected.
LockNode connected.
SmartLocker AX
EN