Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
VII.RECYCLING INFORMATION
This electronic product must not be disposed of in municipal waste. To preserve the envi-
ronment, this product must be recycled after its useful life as required by law.
VIII. COMMON ERRORS:
ERRO CODE
REASON
A) electricity not connected
B) power switch does not turn on
C) pcb no power or broken
NO DISPLAY
D) signal wire not connected
E) computer broken
F) background light broken
NOT
DISPLAY
A) display drive IC not inserted well
ALL
INFORMATION
B) EMI gasket slip, not well fastened
A) driving position has resistance
NOT
RUN
SMOOTHLY
B) running belt too tight or too loose
C) pcb torque too big or too small
- - -
A) safety key off
A) signal wire not well connected
B) signal wire broken
E01
C) signal wire broken
D) pcb broken
A) motor wire not well connected, or
E02
open circuit
B) IGBT on pcb broken
HOW TO SOLVE
Connect the electricity
Turn on power switch
Press over-load protector or change
new pcb
Re-connect signal wire or change new
one
Change new computer
Check background light wire or change
new one
Re-insert IC, and re-weld it or change
new one
Re-assemble screen
Adjust driving position, or add some
silicon oil
Adjust the belt tension
Adjust torque to right position
Put on safety key
Re-connect signal wire
Change new signal wire
Change new computer
Change new pcb
Re-connect motor wire or change new
motor
Change new pcb
33
Werbung
Inhaltsverzeichnis
