Klarstein CLARA Bedienungsanleitung Seite 34

EN
34
Installing an activated carbon filter (not included)
Note: You can also purchase an activated carbon filter for this cooker hood
under item number 10035386. To do so, visit our website: www.klarstein.co.uk
1
With an activated carbon filter,
unpleasant food odours can be
filtered out of the air in internally
vented extractor hoods. As a rule,
the activated carbon filter should
be changed every 3 to 6 months,
depending on your cooking habits.
Note: If an activated carbon filter is installed, the extraction performance
decreases slightly.
2
Before inserting the activated carbon
filter, pull the power plug out of the
socket. To be able to install the filter,
you must first remove the grease
filter. Press the fastener and pull it
down.
3
Put the activated carbon filter on the
fan and turn it clockwise to tighten.
Repeat the procedure on the other
side.
Make sure the filter is tight, otherwise
it could come loose and pose a
hazard. Replace the grease filter and
insert the plug into the socket.