Klarstein CLARA Bedienungsanleitung Seite 32

EN
32
•
•
•
4 Decor
When you switch on the unit for the first time and press
lighting this button, the white light comes on by default. If you
press the button again, the decor lighting goes off. The
button can be pressed during operation. The decorative
lighting works independently of the On/Off button.
1.
2.
3.
If you press the button again while the appliance is
running at low fan speed, the cooker hood switches
to medium fan speed and the display shows "2".
If you press the button again while the appliance is
running on medium fan speed, the extractor hood
will switch to the highest fan speed and "3" will
appear on the display.
While the unit is in operation, the fan speed can
be adjusted in a circular fashion by pressing the
button: low > medium > high > low > medium ...
Press and hold the button for 3 seconds to
enter the automatic colour matching mode. The
decorative lighting changes between the colours
blue > green > red in different brightness levels
in the pre-programmed sequence. Press and hold
the button again for 3 seconds to switch off the
decorative lighting. The indicator light goes out.
When the colour of the decor lighting is displayed
in automatic colour matching mode, press the
button once to pause the currently displayed colour
for the moment. Pressing the button again resumes
the automatic colour matching mode. When the
colour of the decor lighting pauses on a colour,
press and hold the button for 3 seconds to turn the
lighting off. The cooker hood automatically saves
the colour as the colour of the decor lighting.
When the colour of the decorative lighting has
been saved, press the button once. The colour of
the decorative lighting then automatically changes
to the stored colour. If you press the button again,
the decorative lighting goes out. Repeat the above
steps to switch on the decor lighting.