Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Diamond core drill with cable-integrated cable PRCD protective switch, wet-
type connector with ball valve and GARDENA connector, adapter for
deduster connection (dia. 35 mm) and instruction manual in transport case.
Application for Indented Purpose
The diamond core drill ETN 152/3 P is indented only for professional use
and may be used only by instructed personnel.
It may be used either with or without a suitable diamond drill rig. For wet
drilling jobs with diameters above 70 mm and drilling in the 1
must to use a suitable drill rig.
st
Drilling in the 1
counter torques may cause danger to the user!
With an appropriate drill bit, the tool can be used for wet cutting of concrete
and stone and dry cutting of bricks, sand-lime bricks and pore concrete.
Safety Instructions
Safe use of the tool is only possible if the user had
studied the instruction manual and safety instructions
completely and is strictly following the instructions
contained therein.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use
the tool with damaged mains cable.
Prior to drilling in walls and ceilings, check them for hidden
cables, gas and water pipes and other media.
Check the working area, e.g. using a metal detector.
Prior to the start of your work, consult a statics specialist to
determine the exact drilling position.
If drilling through ceilings, secure the place below, because
the may fall downward.
The tool must neither be wet nor used in humid environment.
Do not use the tool in an environment with danger of explosion.
Do not use the tool standing on a ladder.
Do not drill into asbestos-containing materials.
Supply
gear without drill rig is prohibited! On careless use,
19
st
gear, it is a
Werbung
