Herunterladen Inhalt Inhalt Diese Seite drucken

Operator Responsibilities; Maintenance; Inspection; Replacement Of Wearing Parts - BWT Infinity A Einbau- Und Bedienungsanleitung

Automatischer rückspülfilter ap mit differenzdruck-steuerung
Vorschau ausblenden Andere Handbücher für Infinity A:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
9

Operator responsibilities

You have purchased a product that is durable and
easy to service. However, all technical equipment
requires regular servicing to guarantee optimal
functionality.
Regular checks of the filter by the operator are re-
quired to ensure the warranty conditions and proper
functioning of the unit.
The operator must perform a visual check and
backwash the filter to guarantee functionality and
fulfil the warranty conditions. Additionally for HWS:
Check the output pressure every 2 months when
there is no flow and when large quantities of water
are drawn off.
According to DIN EN 806-5, the filter must be
checked for leaks and dirt every six months and
backwashed at regular intervals, which may depend
on operating conditions but be no longer than six
months.
9.1

Maintenance

The replacement of wearing parts within the prescri-
bed maintenance intervals is also required for the
warranty and proper functioning of the unit. Only
qualified technicians may replace wearing parts.
9.4

Troubleshooting

Fault
Water pressure dropped
considerably in network
Flushing water outlet
does not close
Infinity AP only:
Display shows ERR
If the fault cannot be remedied by following these tips, contact our after-sales service department.
30
Cause
Dirty filter element
Backwash element does not
reach the end position due to
large particles of dirt
Scaling at the vent tube (5)
Pressure too low
9.2

Inspection

Check for leaks, visual inspection
Check treated water quality
9.3

Replacement of wearing parts

Flat gasket
Stopper
Filter element
Backwash element (repair kit)
Solenoid valve
O ring (in bayonet)
Transparent cylinder
We recommend that you conclude a maintenance
contract with your plumber.
Action
Carry out backwash
Repeat backwash several times
Unscrew wastewater connection
(6) and clean vent tube (5) outside
Repeat backwash several times.
Increase pressure
Weekly
Monthly
every
3 years
every
3 years
every
6 years
every 6 years
every
9 years
every 15 years
every 15 years

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Infinity ap

Inhaltsverzeichnis