Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
For the engine and the battery, the provisions of the relative manufacturers apply.
RECOMMENDED LIST OF SPARE PARTS TO BE KEPT IN STORE
2 x mowing blades
2 x blade screws
2 x blade screw nuts
1 x set of belts
1 x air filter for engine
1 x oil filter for engine
1 x throttle cable
2 x wiring system fuses
TECHNICAL SPECIFICATIONS
ENGINE:
7.13 - B&S VANGUARD 13,5 hp (10 kW) OHV, single-cylinder, internal combustion, 4-stroke, AVS synchro-
balanced series.
7.16 - B&S VANGUARD OHV 16 hp (13 kW), twin-cylinder, internal combustion, 4-stroke series.
7.21 - B&S VANGUARD OHV 21 hp (15.5 kW), twin-cylinder, internal combustion, 4-stroke series.
HOURLY CONSUMPTION: 3 lt/h – 7.13 / 3.5 lt/h – 7.16 / 3.8 lt/h – 7.21.
STARTING SYSTEM: electric, with battery 12V.
GEARBOX: hydrostatic transmission.
DIFFERENTIAL: with locking device.
CLUTCH: for PTO with electromagnetic clutch.
GROUND SPEED: from 0 to 9 km/h with continuous variation and reverse from 0 to 4 km/h.
TYRES front: 13x5.00-6; rear: 16x 6.50-8.
BRAKE: front emergency brake; rear parking brake.
OPERATOR SEAT: sprung und adjustable, fitted with roll bar.
CUTTING DECK: side/rear discharge.
CUTTING SYSTEM: single rotating blade.
CUTTING WIDTH:
BLADE SPEED: 76 m/sec.
CUTTING HEIGTH: from 35 mm to 85 mm, 6 cutting positions and 1 for travelling.
WORK CAPACITY: 5000 m
STEERING RADIUS: 450 mm.
FUEL TANK: 7 lt,
TOWING BAR: as a standard.
SIZES: W950xL1895xH975mm.
WEIGHT:
225 kg – 7.13 /
PUTTING THE MACHINE INTO SERVICE
1) Check that the machine has not been damaged in transit.
2) Check the oil levels of the engine, hydrostatic transmission and final drive.
3) Check the tyre pressure:
4) 1 BAR front wheels 13 x 5.00-6
5) 1.2 BAR rear wheels 16 x 6.50-8.
6) Check the battery voltage; it must be at least 12 Volts. Charge if necessary.
7) IMPORTANT!!! During assembly take care not to reverse the polarity of the battery.
8) Fix the steering wheel taking care the key is properly inserted and the screw is tight enough
(tightening torque 2 KgF.m [20 N.m]).
9) Fit the muffler, the rear bumper and the roll bar.
Climber Series 7/ Translation of the original instructions
850 mm.
2
/h (indicative) – 7.13
RESERVE: 1 lt.
235 kg – 7.16 /
INSTRUCTIONS FOR USE
2
/ 6.000 m
/h (indicative) – 7.16 & 7.21
245 kg – 7.21.
7
Werbung
Inhaltsverzeichnis
