Maintenance And Lubrication - Climber CL7.13 Bedienungsanleitung

Press the differential locking pedal in case of driving-wheels skidding. It is advisable to use the locking
also sloping down and in steep slant to keep both the driving-wheels in adhesion.
Attention! Do not use the differential locking when bending.
In case of disengagement, keep lubricate with grease the coupling and the drive-chains (fig. 27).
USEFUL RULES FOR EFFICIENT USE
1)
Never strain the engine: when fumes are emitted from the exhaust it means that it is being strained.
Slow down.
2) Do not leave the machine out in the rain.
3) Frequently sharpen the mower blades: the cut will be better and the engine will not be strained as
much.
4) Check the land before mowing to make sure that there are no stones, sticks or foreign bodies.
5) Keep the engine at peak rpm during mowing, adjust the speed according to the height of the grass.
6) Keep the grilles above the engine and the cooling fins of the hydraulic motor (fig. 4 - 5) clean.
CUTTING POSITIONS
The cutting position is adjusted using the lever 8 fig. 2.
The deck can be set in 4 different cutting positions from 35 to 80 mm and one travel position in which the
blade disengages automatically.
In case of uneven ground, humps or dips, the deck should be kept in the highest cutting position to
prevent knocks by the blade.
SLOPING GROUND
If possible, steep slopes must be mown in the up/down direction, taking great care when turning that the
wheels upstream do not strike obstacles (stones, branches, roots, etc.) which might cause the machine
to overturn, or lead to loss of control.
Assess the conditions and take care if the ground and grass are damp since the machine might slip.
Downhill, set off at low speed and do not pass over dry or cut grass since the wheels lose grip; please
remember that if you engage the differential lock and eventually the front emergency brake (4, fig. 1) the
machine is steadier.
INTERVENTION OF SAFETY DEVICES
Remember that the engine will stop whenever:
– The operator gets up from the seat.
The engine will not start up if:
– The blade is engaged.
– Nobody is sitting in the driver's seat.
– If the forward lever isn't at STOP setting.
CAUTION
Remove the key and disconnect the plug before performing any cleaning, maintenance or repair
operation. Always wear suitable clothing and working gloves.
IMPORTANT!
Protect the environment: carefully dispose of used oils, petrol and any other pollutant product!
Efficient maintenance and correct lubrication help keep the machine in perfect working order.
ENGINE
For the lubrication intervals, follow the instructions provided in the engine handbook; in all cases the oil
Climber Series 7/ Translation of the original instructions

MAINTENANCE AND LUBRICATION

9