Switching Off - Nuova Simonelli TALENTO Gebrauchsanweisung

EN
WARNING
The water hardness must be less then 4° - 6° fr
(french degree).
The chlorine content must not exceed 100mg per
litre (0.00000361lb/cu in).
Otherwise the conditions of guarantee of the
machine will expire.

The machine must be installed according
to the local standards in force with regard
to plumbing systems. For this reason, the
plumbing connections must be carried
out by a qualified technician.
4.2 FILLING THE COFFEE
CONTAINER
1
Remove the cap to access the granulated coffee
bean container.
WARNING
Pour ONLY toasted coffee beans into the coffee
bean holder. any other kind of coffee, for example
ground coffee, will damage the coffee grinder.
Don't insert caramelized, sugar coated, or simi-
larly coated coffee beans, or instant coffee or
other sugary beverages because they will harm
the appliance.
2
Don't fill to the brim but pour just enough toasted
coffee beans into the coffee bean holder to
ensure correct closure of the unit.
3 Close the cap.
4.3 SWITCHING ON
NOTE: in case the following procedure shouldn't
take effect, see the chapter on "Problems
and Solutions".
All manuals and user guides at all-guides.com
After the preliminary operations:
Press the ON/OFF
The machine will carry out a group positioning cycle;
this is the cycle for filling the boiler with water at the
end of which, if the machine is cold, there will be a
heating cycle and the display will read:
after the heating phase, the display will read: and the
machine will be ready for use.
The heating stage takes approx, 5 minutes.
NOTE: The appliance is endowed with a security
The machine is now ready to be used.
WHEN INSTALLING FOR THE FIRST TIME
OR STARTING THE MACHINE AGAIN AFTER
Fig. 17
BOILER TANK GROUP SERVICING, BEFORE
SWITCHING ON THE MACHINE AND STARTING
THE HEATING PROCESS, BE SURE TO FILL THE
COFFEE BOILER TANK, (PAGE 57 PARAGRAPH
8.3) UNTIL THERE IS A REGULAR FLOW FROM
THE WAND.
4.4
To switch off the machine, proceed as follows:
PLEASE wAIT
SELECT PRODUCT
system that will stop the machine after about
1.5 minutes of constant functioning of the
pump (to avoid pump overheating). In this
case, switch off the main switch of the
machine and then turn it on again.
WARNING

SWITCHING OFF

• Press the ON/OFF key
key.
.
45