Setting The Duration; Using The Accessories; Inserting The Accessories - Electrolux KOIGH00K Benutzerinformation

12 www.electrolux.com
Press the
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
again and again until

8.3 Setting the DURATION

1. Set an oven function and
temperature.
2. Press
starts to flash.
3. Press
time.
The display shows
4. When the time ends,
an acoustic signal sounds. The
appliance deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
8.4 Setting the END
1. Set an oven function and
temperature.
2. Press
starts to flash.
3. Press
The display shows
4. When the time ends,
an acoustic signal sounds. The
appliance deactivates automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
8.5 Setting the TIME DELAY
1. Set an oven function and
temperature.

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
or to set the correct
starts to flash.
again and again until
or to set the DURATION
.
flashes and
again and again until
or to set the time.
.
flashes and
2. Press again and again until
starts to flash.
3. Press or
DURATION.
4. Press .
5. Press or
END.
6. Press to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds.
7. The appliance deactivates
automatically. Press any button to
stop the signal.
8. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
8.6 Setting the MINUTE
MINDER
1. Press again and again until
starts to flash.
2. Press or
time.
The Minute Minder starts automatically
after 5 seconds.
3. When the set time ends, an acoustic
signal sounds. Press any button to
stop the acoustic signal.
4. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
8.7 Cancelling the clock
functions
1. Press the again and again until
the necessary function indicator
starts to flash.
2. Press and hold
The clock function goes out after some
seconds.

9.1 Inserting the accessories

Wire shelf:
to set the time for
to set the time for
to set the necessary
.