5. Installation
5.3 Funkadapter im CX montieren
Achtung!
Vor der Installation
des Funkadapters den
Durchlauferhitzer spannungsfrei
schalten!
Achten Sie auf die korrekte
Position des Steckers!
Der Stecker muss richtig in die
Nut gesteckt sein.
Die Antenne ist sehr empfind
lich!
Abbildung 4:
Montage des Funkadapters CX
5. Installation
5.3 Mounting the radio adapter inside a CX
12
Attention!
Before assembling the trans-
mission unit disconnect the
instantaneous water heater
from the mains supply!
Pay attention to the proper
position of the connector!
The connector has to be fit-
ted into the notch properly.
The antenna is very fragile!
Installation of transmission unit CX
Figure 4: