Dmx-In Via Art-Net; Dmx-In Via Usb - MADRIX ORION Kurzanleitung & Technisches Handbuch

How To Install On DIN-Rails
1
2
Unmounting (Pictured Right)
Step 1) Pull the unlocking clip.
Step 2) Lift the lower part of the device from the
rail in an angle.
Step 3) Lift the device from the rail.
Using The MADRIX
You can mainly use 3 operating modes together with the MADRIX
� DMX-IN Via Art-Net
� DMX-IN Via Streaming ACN
� DMX-IN Via USB
In MADRIX ® 5, make sure to activate the correct drivers first:
– For USB, go to 'Preferences' > 'Options...' > 'Devices USB',
– For sACN, go to 'Preferences' > 'Options...' > 'Devices Network',
– For Art-Net, go to 'Preferences' > 'Device Manager...' > 'Art-Net'.
Then, configure your devices and activate input in order to receive the data:
– Go to 'Preferences' > 'Device Manager...' > 'DMX Devices',
– Go to 'Preferences' > 'Device Manager...' > 'DMX Input'.
For more information, see the MADRIX
15
EN
Mounting (Pictured Left)
Step 1) Hook the device in an angle onto the upper
edge of the rail.
Step 2) Pull the unlocking clip.
Step 3) Press the lower part of the device against
the rail and let the clip snap into position.
3
® 5 Software
® 5 User Manual.
2
1
®
5 Software:
3