MADRIX ORION Kurzanleitung & Technisches Handbuch Seite 9

Daisy-Chain Support
MADRIX ® ORION features 2 separate Ethernet network ports. Either one is fully
functionally for IN and OUT and can be used for the data connection without using
a separate network switch or router. It is recommended to connect a maximum
of 8 units after one another in a row.
Connection Diagram Examples
You can connect your input equipment, MADRIX
data cables in different ways. The following pages show several examples. These
schemes are to be seen independently of the direction, position, and mounting
method. Please see p. 6 and p. 7 for further information.
SUPPLY POWER TO ORION ONLY ONCE! DO NOT CONNECT V+
MULTIPLE TIMES BY CONNECTING IT VIA PORT 1/2 AND POWER.
Legend
Example A
Description: Power is supplied only once to ORION and also used for the input equipment. Each Port
is protected with 500 mA max. For example, a potentiometer is connected to Port 1 via Ground, Signal
at Pin1, and V+, while a switch is connected to Port 2 via Signal at Pin 5 and V+.
Connection required for Ground.
Connection required for Signal.
Connection required for V+.
® ORION, supply of power, and
USB Data
Network Data
Power
8
EN