Safety Instructions - MADRIX ORION Kurzanleitung & Technisches Handbuch

Safety Instructions

Please follow the instructions below to avoid mishandling, damage to the
device, or personal injury:
THE DEVICE WORKS WITH LOW VOLTAGE (DC 5 V – 24 V).
DO NOT USE ANY OTHER VOLTAGE!
External USB power supplies: Using non-permissable units
poses risk of fire. 5.5 V⎓500 mA max. output is allowed.
Any connected external power supply needs to be fused
according to its output and/or short-circuit proof.
In order to cut off the supply of power completely, you need to
disconnect any external power-supply unit as well as USB.
Recommendation: DIN-Rail Power Supply 12 V (MEAN WELL HDR-15-12,
DC Output, 12 V, 1.25 A, 15 W, 1 SU, DIN Rail) / Order Number: IA-HW-001027.
Beware that the interface works with electrical power. Only use the
device in dry environments (indoor use). The IP Rating of the device
is IP20. Do not use the interface in humid environments and avoid
contact with water or any other liquids. Turn off the power if you are not using
the device for a long time.
Avoid unwanted voltage on the cables at all times. Do not remove any parts from
the unit or connect to an ungrounded circuit. Do not connect the unit to
equipment that is switched on. Only connect the unit to equipment that is initially
powered off.
There are no user serviceable parts inside or outside the interface. Repair service
lies only within the responsibilities of the manufacturer. If the interface appears
to be defective, please contact your dealer. After expiration of the warranty period
you may contact your supplier or the manufacturer to have the unit repaired
against payment of an individual service fee if possible.
The interface has several ports and slots. Only connect or insert devices, cables,
and connectors to the individual ports and slots using connectors of the same type
as the port. Do not use inapplicable equipment. This device should be used by
professionals. The device is not designed to be operated by non-professionals or
children.
3
EN