Configuration; Input Mode; Input Type; Power Mode - Balluff BAE SA-OH-061-UA-DP02 Betriebsanleitung

BAE SA-OH-061-UA-... / BAE SA-OH-062-IC-...
Photoelectric Sensors
7
Menu structure (continued)
7.6

Configuration

CONFIG CON Configuration of Operation Modes
PowerMode POW High, Std*, Low, Xlow
SpeedMode SPE Max. Switching Frequency
Standard* STSP Standard 1000 Hz
Fast FASP Fast 4 kHz
Superfast SFSP Superfast 8 kHz
Sync 7 SYN7 Sync 7 500 Hz
Precision PRSP Precision 125 Hz
High Pr 25 H2SP High Precision 25 Hz
High Pr 30 H3SP High Precision 30 Hz
SyncMode SYN Auto, Master, Slave, Off*
InputConf (*3) INP Input Configuration
Inp Type TYP PNP*, NPN
Inp Mode MOD Off*, Teach-In, En.Emitter, DisEmitter
* Factory defaults
(*3) ..-DP02, -S75G-SA3
7.6.1

Input Mode

The function of the pin can be selected with Mode.
Value Meaning
Off The pin has no function.
Teach-In The pin works as a digital teach input.
En.Emitter The pin works as a digital input to enable
the transmit LED.
DisEmitter The pin works as a digital input to disable
the transmit LED.
Tab. 7-6: Configuration – Input Mode
www.balluff.com
7.6.2

Input Type

The input can be configured with Type.
Value Meaning
PNP PNP
NPN NPN
Tab. 7-7: Configuration – Input Type
7.6.3

Power Mode

The power mode "High" should only be used if the high
power is really needed in order to avoid unnecessary high
current consumption and heating of the BAE. The modes
"Low" and "Extra Low" are mainly intended for transmitted
light barriers with short distance between transmitter and
receiver.
The LED pulse peak current depends on the speed mode:
Standard,
Sync7,
Value Meaning Precision,
High Precision 25 Hz
High Precision 30 Hz
High High 180mA
Std Standard 100mA
Low Low 55mA
Xlow Extra Low 18mA
Tab. 7-8: Configuration – Power Mode
Description
PNP input
NPN input
Super-
Fast
fast
90mA 60mA
50mA 33mA
27mA 18mA
18mA 18mA
english 17