Led Meaning - Balluff BAE SA-OH-061-UA-DP02 Betriebsanleitung

BAE SA-OH-061-UA-... / BAE SA-OH-062-IC-...
Photoelectric Sensors
7
Menu structure (continued)
7.7

LED Meaning

Description
Only the signal with the highest priority is displayed. The signals are listed in descending priority.
LED PWR (Operating state and communication)
Name
Ready
Tab. 7-11: Meaning of the LED states, LED PWR
LED Alarm (Indication/Warning/Teach)
Name
Teach-in No Object
Teach-in
Bad Signal Quality
Tab. 7-12: Meaning of LED States, LED Alarm
LED SIG
Name
SIG
Tab. 7-13: Meaning of LED States and Configuration, LED SIG
LED SYNC
Name
SYNC
Tab. 7-14: Meaning of LED States and Configuration, LED SYNC
www.balluff.com
Signal
Green, static
Signal
Red, flashing, 2 Hz 1:1
Red, static
Red pulse 50 ms
Signal
Yellow, static
Signal
Orange, static
Meaning
The device is ready.
Meaning
The sensor is in Teach-In mode and no object is visible.
Teaching is not possible.
The device is currently in teach-in mode.
Poor signal quality, the signal quality is below the war-
ning threshold.
Meaning
Signal status (Signal ≥ Teach Point)
Meaning
Synchronization established
english 19