Installing The Reserve Parachute - SUPAIR ACCESS 2 BUMP Betriebshandbuch

Harness User's manual | ACCESS 2 BUMP
Thank you for reading the following carefully ! We recommend for the initial rescue parachute assembly and installation to be made
by a qualified professional.
Reserve parachute folding and installation inside the harness must conform to the specific guidelines found in this manual.
We are not responsible for any other use.
The volume of reserve parachutes may vary depending on the folding
Rescue parachute pocket characteristics
• Flaps fastened with a cable
• Volume 3 to 8 liters
• Adapted to the reserve parachutes SU-
Connecting the handle to the POD
Fasten the reserve parachute handle bridle to the
1
external pod loop via a Lark's head knot connection.
If you have a large reserve
parachute, and feel a slight
resistance during the pod
extraction hang-test, con-
nect the reserve parachute
handle to the side loop in-
stead.

INSTALLING THE RESERVE PARACHUTE

PAIR, START, SHINE, FLUID and FLUID
LIGHT as well as other rescue solo mod-
els.
ACCESS 2 BUMP Size S and M
Compatible
S M L
parachutes
SHINE *
START *
FLUID
FLUID LIGHT * *
*When using a reserve parachute between 3 and 3.5L, it is strongly recommended
to use the wedge provided for this purpose (ref: Access 2 wedge)
Tighten the handle/POD
2
connection securely.
ACCESS 2 BUMP size L
Compatible
S M L
parachutes
SHINE *
START *
FLUID
FLUID LIGHT * *
ACCESS 2 BUMP | page 13