inshape 2500 Gebrauchsanweisung Seite 62

Step 2
Connect computer upper wire 4 pin (43) and
computer middle wire 4 pin (44). Use M10*20
bolt (71) and Ø11*Ø20 washer (67) to fix the
computer (9) onto the upright (4L/R). (Lock
all the bolts tightly.) Then connect left &
right handle bar (5L/R) 2 pin and 3 pin wire
to the corresponding computer 2 pin and
3 pin wire. Use M8*15 bolt (69) to fix the
handlebar, and lock the bolts tightly
Step 3
Use M4x15 screws (94) to fit the covers
(32L/33R) to the columns (4L/R). Attach the
dead-man's switch (23) and MP3 cord (70) to
the treadmill.
IMPORTANT!
Once all the parts are assembled, tighten all
the screws.
Check that everything is in order before
using the treadmill.
Also read the instructions before use.
62
All manuals and user guides at all-guides.com
Folding up
Lift the treadmill up until the pneumatic
cylinder locks in place with an audible click.