Operating Elements And Connections; E2 Receiver - Omnitronic E2 Bedienungsanleitung

3 Operating Elements and Connections

3.1 E2 Receiver

3
6
No. Element
1 Receiver channel A
2 Receiver channel B
3 Power switch
4 Level controls
5 Status indicators
6 Antenna inputs
7 Power input
8 Cable grip
9 Mixed output
10 Channel outputs
1 4 5
8 9
7
Function
Switches the receiver on and off. The adjacent power indicator
lights up when the receiver is powered on.
Control for the audio signal of the respective channel at the rear
outputs.
AF: Lights up when an audio signal from the microphone is received .
RF: Indicates an existing connection to the microphone.
To connect the antennas provided.
Plug in the connection cable of the supplied power adapter here.
For the power cable.
Unbalanced 6.3 mm jack for the output of the master signal of all
channels. For connection to a microphone or line input of a mixer
or amplifier.
Balanced XLR outputs for the output signal from the respective
channel. For connection to balanced microphone inputs of a mixer
or amplifier.
10
16 • EN
2
6