Operating Elements And Connections; Uhf-101 Receiver - Omnitronic UHF 101 Bedienungsanleitung

3 3 3 3 Operating Elements and Connections

3.1 UHF-101 Receiver

No. Element
1 RF/AF status indicators
2 LEVEL control
3 Power indicator
4 Power switch
5 ANTENNA input
6 Balanced signal output
7 Unbalanced signal output
8 Power input
1
5 6
Function
RF: Indicates an existing connection to the microphone.
AF: Lights up when an audio signal from the microphone is received.
Control for the audio signal at the rear outputs.
Lights up when the receiver is powered on.
Switches the receiver on and off.
To connect the antenna provided.
XLR jack for connection to a balanced microphone input of a mixer
or amplifier.
6.3 mm jack for connection to an unbalanced microphone or line
input of a mixer or amplifier.
Plug in the connection cable of the supplied power adapter here.
2
7
16 • EN
3 4
8