Operating Elements And Connections - Omnitronic UHF-201 Bedienungsanleitung

4. OPERATING ELEMENTS AND CONNECTIONS

2
Power on/off with indicator
Switches the receiver on or off. The button lights up
as a power indication.
2
Reception indication RF
Indicates an existing connection to the microphone.
5
Reception antenna
Picks up the transmission signal of the microphone.
6
Signal output, unbalanced
Unbalanced output (6.3 mm jack) for connection to
an unbalanced microphone or line input of a mixer
or amplifier.
3
Reception indication AF
Lights up when an audio signal from the
microphone is received.
4
Volume control
Volume control for the audio signal at the rear
outputs.
7
Signal output, balanced
3-pin, balanced XLR output for connection to a
balanced microphone input of a mixer or amplifier.
8
Power input
Plug in the connection cable of the supplied power
unit here.
13/17 00074635.DOC, Version 1.0