Operating Elements And Connections - Omnitronic UHF-202 Bedienungsanleitung

4. OPERATING ELEMENTS AND CONNECTIONS

Power on/off with indicator
1
Switches the receiver on or off. The button lights up
as a power indication.
Reception indication RF-A and RF-B
2
Indicate an existing
corresponding microphone.
Reception antennas
5 5 5 5
Pick up the transmission signal of the microphones.
Unbalanced mixed output
6
Output of the master signal of both channels (6.3
mm jack, unbal.) for connection to a microphone or
line input of a mixer or amplifier.
connection to the
12/16
Reception indication AF-A and AF-B
3
Light up when an
corresponding microphone is received.
Volume controls
4
Controls for the audio signal of the respective
channel at the rear outputs.
Balanced channel outputs
7
3-pin, balanced XLR outputs for the output signal
from the respective channel. For connection to
balanced microphone inputs of a mixer or amplifier.
Power input
8
Plug in the connection cable of the supplied power
unit here.
00088530.DOC, Version 1.0
audio signal from the