Base (20) (×1) - Sony SU-WL450 Installationsinformationen

Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV or LCD Monitor and is capable of
supporting a weight of at least four times
that of the TV or LCD Monitor.
Refer to your TV's or LCD Monitor's
Reference Guide for the TV's or LCD
Monitor's weight.
Note
 When your TV or LCD Monitor is installed on the
wall, the upper side of the TV or LCD Monitor
slightly leans forward.
 We recommend you to check the position of TV or
LCD Monitor in the viewing environment.
2
Select wall mounting style as
shown below.
2-a: Standard mounting
2-b: Slim mounting
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on page
14.
WARNING
 When 2-b is selected, rear terminal access is
limited.
2-a 2-b
− 8 (GB) −
3
If standard mounting (2-a) is
selected:
Fit Base Adaptor  by using
Screw (+PSW 4 × 10)  to Base
(20) .
• Refer "Base Adapter  fitting location" on
page 14.
Eg. Fitting Base Adaptor  at location "a"
If slim mounting (2-b) is
selected:
Skip this step.
4
Decide the positions of the
screws for installing the Base
(20) .
• Refer "Specifications" on page 13.
WARNING
 Determine the strength of the wall the TV or LCD
Monitor will be mounted on. Reinforce the wall
sufficiently, if necessary.
 The wall that the TV or LCD Monitor will be
mounted on should be able to support a weight of
at least four times that of the TV or LCD Monitor.
(Refer to your TV's or LCD Monitor's Reference
Guide for its weight.)
If standard mounting (2-a) is selected:
Use the hole positions of Base Adaptor .
Eg. Marking at location "a" to fit Base (20) 