Assembly and operating instructions Type EEM400-D-MO
65 A Three-phase active power energy meter with Modbus interface, Pic. 1
Description
Energy meter with RS-485 Modbus interface enables the
reading of all relevant data like meter reading, electricity,
voltage and power (active and reactive).
Technical data
Connection
■
Pic. 2
diagram
Dimensions
■
Pic. 3
Accuracy class
B according to EN50470-3,
■
1 according to IEC62053-21
Reference, Maxi-
I
= 10 A, I
■
ref
mum, initial current
Operating voltage
3 × 230/400 V
■
Tolerance –20 %/+15 %
Counting range
■
00 000,00...999 999,0 kWh
LED-Ouptut
1000 Imp/kWh
■
Connections
Conductor cross-section 1,5...16 mm
■
main circuit
screwdriver pozi no. 1, slot no. 2,
torque 1,5...2 Nm
Connections
■
Conductor cross-section max. 2,5 mm
Control circuit
screwdriver pozi no. 0, slot no. 2,
torque 0,8 Nm
Operating
–25... +55 °C (noncondensing
■
temperature
according standard EN50470)
Environment
Mechanical M2
■
Electromagnetic E2
Indicating elements (Pic. 4)
T1total (kWh)
Shows total consumption Tariff 1
■
T1part. (kWh)
Shows partial consumption for
■
Tariff 1, this value is resettable
T2total (kWh)
Shows total consumption Tariff 2
■
T2part. (kWh)
Shows partial consumption for
■
Tariff 2, this value is resettable
Shows the instantaneous power
P (kW)
■
per phase or all phases
Shows the voltage per phase
U (V)
■
Shows the current per phase
I (A)
■
Shows the unit kWh when the
kWh
■
consumption is displayed
For P-, U-, I- or Error display, the
L1 / L2 / L3
■
corresponding phase is displayed
In case of missing phase or wrong
Error
■
current direction. The corresponding
phase is additionally displayed.
Notes before connecting
1. Do not connect L1, L2 or L3 to N
2. In order to avoid moisture in the meter due to
3. N must always be connected.
Attention!
These devices must only be installed by a professional
electrician, otherwise there is the risk of fire or the risk of
an electric shock.
Operation of the LCD display
= 65 A, I
40 mA
max
st =
See page with LCD menu navigation
, 50 Hz
AC
Installation instructions
,
2
The three-phase energy meter can be attached to a 35 mm
rail (EN60715TH35).
The meter can be used only in installation cabinets.
,
2
Declaration of Conformity CE
We, Honeywell Technologies Sàrl, 1180 Rolle, herewith
declare, on our own responsibility that the product:
■
which this certificate refer to, are in accordance with the
directive 2004/22/EG (MID) and the following standards:
■
Murten, 30.04.2013
Conformity Assessment Body:
Signed:
condensate build-up, acclimatise the meter at room
temperature for about half an hour before connecting.
EEM400-D-MO-MID
EN50470 parts 1 and 3 (electronic meter), of
October 2006.
METAS-Cert, Nr. 1259
CH-3003 Bern-Wabern
Urs Tanner, Site Quality Leader
English