Connecting The Power - FS S5850-24S2C-DC Schnellstartanleitung

Grounding the Switch
1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the
switch is mounted.
2. Secure the grounding lug to the grounding point on the switch back panel with the washer and
screws.
CAUTION: The earth connection must not be removed unless all supply connections
have been disconnected.

Connecting the Power

The front panel of the power supply indicates a DC inlet power socket and consists of one terminal
block connector within 3 contacts. Please follow the steps below to insert the power wire.
1. Insert positive/negative DC power wires into Contacts + and -.
NO.
1
2
3
2. Tighten the wire-clamp screws to prevent the wires from loosening.
6
+ -
NULL
Name
+
-
NULL
ID SY S
CO N
ET H
S 5 8 5 0 -2
ID SY S
CO N
ET H
S 5 8 5 0 -2
Description
Positive
Negative
Null
4 S 2 Q
+
-
NU LL
-4 8V - -6 0V
,6A
4 S 2 Q