3. Lift up the lever to disengage the parking brake.
4. Align the front pointer (A) and the kerf guide (B) with
the line where you will cut.
B
5. Pull the throttle control up fully.
Note:
Always operate the engine at full engine
speed for maximum capacity.
52
6. Pull the cutting depth handle in the direction of the
handlebar and carefully lower the blade.
A
7. Push the forward speed lever in the direction of
"FAST" to move the product forward. Start slow and
increase the speed until you get the correct cutting
speed.
Note:
Do not push the product.
793 - 001 - 19.04.2022