Husqvarna Soff-Cut 2000 Bedienungsanweisung Seite 62

5. If the drive belt is damaged, replace the drive belt.
To replace the drive belt on page 62 .
Refer to
6. If the drive belt is not damaged, attach the drive belt
cover.
To replace the drive belt
1. Remove the drive belt cover, refer to
drive belt on page 61 .
2. Lift the belt tensioner to loosen the tension of the
drive belt and remove the drive belt.
62
3. Turn the 2 locking knobs counterclockwise and
4. Push down on the kerf guide to release the skid
To examine the
remove the blade block guard.
plate.
793 - 001 - 19.04.2022