HIKMICRO SP-Serie Schnellstartanleitung Seite 18

Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may
result in damage on the device and the company shall not take any
responsibilities.
● Do not drop the product or subject it to physical shock. Keep the device
away from magnetic interference.
Power Supply
● The input voltage should meet the Limited Power Source (7.2 VDC, 890
mA) according to the IEC61010-1 standard. Please refer to technical
specifications for detailed information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
Battery
● The built-in battery cannot be dismantled. Please contact the
manufacture for repair if necessary.
● DO NOT charge other battery types with the supplied charger. Confirm
there is no flammable material within 2 m of the charger during
charging.
● For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
● DO NOT place the battery near heating or fire source. Avoid direct
sunlight.
● DO NOT swallow the battery to avoid chemical burns.
● DO NOT place the battery in the reach of children.
● When the device is powered off and the RTC battery is full, the time
settings can be kept for 3 months.
16