HIKMICRO SP-Serie Schnellstartanleitung Seite 20

● DO NOT expose the device to high electromagnetic radiation or dusty
environments.
● DO NOT aim the lens at the sun or any other bright light.
● When any laser equipment is in use, make sure that the device lens is
not exposed to the laser beam, or it may burn out.
● The device is suitable for indoor and outdoor uses, but do not expose it
in wet conditions.
● The level of protection is IP 54.
● The pollution degree is 2.
Technical Support
● The https://www.hikmicrotech.com portal will help you as a HIKMICRO
customer to get the most out of your HIKMICRO products. The portal
gives you access to our support team, software and documentation,
service contacts, etc.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
Laser
Warning: The laser radiation emitted from the device
can cause eye injuries, burning of skin or inflammable
substances. Prevent eyes from direct laser. Before
enabling the Light Supplement function, make sure no
human or inflammable substances are in front of the
laser lens. The wave length is 650 nm, and the power is
less than 1 Mw. The laser meets the IEC60825-1:2014
standard.
Laser maintenance: It is not necessary to maintain the
laser regularly. If the laser does not work, the laser
assembly needs to be replaced in the factory under
18