HIKMICRO SP-Serie Schnellstartanleitung Seite 12

No. Description
31 HDMI Interface
Battery
32
Compartment
Lens Release
33
Button
3. Remove the Battery (Page 3 – B)
Steps
1. Turn off the device.
2. Push the battery compartment lock leftwards to unlock the battery
compartment, and then open the battery cover.
3. Push the inner battery lock (in theblack circle) leftwards to release the
battery.
4. Take the battery out of the battery compartment.
Note:
If you want to install the battery back, push the battery into the battery
compartment. The battery makes a click when it locks in place.
4. Charge the Battery
After the device starts up, the OSD (on-screen display) shows the battery
status. When the battery is low, charge the device and ensure it works
properly.
For the first charge, charge the device for 2 hours.
4.1 Charge Device via Cable Interface (Page 4 – C - ① )
Steps
1. Put the battery into the battery compartment of the device.
2. Lift the cover of cable interface.
3. Plug in the cable, and connect the power supply to charge the battery.
4.2 Charge Device via Charging Base (Page 4 – C - ② )
Function
Connect the device with HDMI cable.
Install the battery in it.
Unlock the interchangeable lens.
10