Accessories And Spare Parts; Scope Of Delivery; Device Description; Symbols On The Device - Kärcher IVM 40/24-2 M Lp Bedienungsanleitung

pose a potential threat to human health and
the environment. However, these compo-
nents are required for the correct operation
of the appliance. Appliances marked by this
symbol are not allowed to be disposed of
together with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials
can be found at: www.kaercher.com/
REACH

Accessories and spare parts

Only use original accessories and original
spare parts. They ensure that the appliance
will run safely and fault-free.
Information on accessories and spare parts
can be found in the Service area at
www.kaercher.com.
Please note:
● No accessories are included in the
scope of delivery. The accessories must
be ordered separately depending on the
application.
● The correct function of the device is only
guaranteed by the prescribed nominal
width of the suction hose (see chapter
Technical data).
● Spare parts and accessories are availa-
ble from your dealer or from your
KÄRCHER branch.

Scope of delivery

Check the contents for completeness when
unpacking. In the event of shipping dam-
age, please notify your dealer.

Device description

For the illustrations, refer to the graphics
page
Illustration A
Steering roller with parking brake
1
Waste hose
2
Sealing plug
3
Suction hose port
4
Pressure gauge
5
Spacer lock
6
Filter dedusting
7
Suction turbine power switch
8
Suction head
9
14
Mains cable
10
filter
11
Sealing ring
12
Filter hold-down device
13
Suction head handle
14
Cable clips
15
Type plate
16
Spacer
17
Push handle
18
Filter ring lock
19
Sheathed cable
20
Sheet metal tray
21
Suction head lock
22
Filter ring
23
Chassis
24

Symbols on the device

The device is suitable for vacuuming dusts
up to dust class M.
WARNING
Damage to the skin, lungs and eyes
Expulsion of fine dust during emptying and
maintenance work and disposal
Wear the prescribed personal protective
gear when performing during emptying and
maintenance work, including disposal of
the dust bag.
The maximum vacuum value in relation to
the hose cross-section is specified on the
label. The actual value can be read on the
pressure gauge. For the values applicable
to this device, see chapter Reading the
minimum volumetric flow. If this value is not
reached, the filter must be cleaned (see
English