Display Panel; How To Use This Appliance; Check Before Use - Zelmer KUBA ZVC333 Benutzerhandbuch

DISPLAY PANEL

How to use this appliance

1.To cọnnect the suction hose: insert the suçtion hose into thẹopening. To dịsconnect the suction hose:
press the buttons on both sides of the suction hose and pull oụt the hose.
2.To connẹct the tubẹto the handgrip. Please connect the metal .telesçopic tube to the upper sideọf the
họse.
3.To adjust the combi nozzle to the type of floor to be cleaned (for carpets) or(for hard floor)
4.To switch the appliance on: press the on/off button
5. To adjust the suction power :please turn the speed control knob
6. To carry the appliance :lift it by the handle

Check before use:

• If the dustbag is full?
• If the nozzle, tub or hose is blocked?
• To rem ve the bstruction, let the air fl w through the hose and/or tube in opposite direction.
Accessory
• Take out the accessory (combination noozle) and connect it to the handlegrip
Storage
1.Switch the appliance off
2.Remove the mains plug from the wall socket
3.Rewind the mains cord by pressing the cord rewind button Attach the lower tube to the vacuum cleaner
4.Cleaning the inlet sponge filter
1. Min suction power
2. Middle suction power
3. Max suction power
4. Dust full indicator How to use the appliance
EN
9