Intended Use; Technical Data - EINHELL TC-WW 1000/1 Originalbetriebsanleitung

•
Plate (2x)
•
Locking grip
•
Wrench for pinion shaft
•
Face plate
•
Crank handle
•
Hexagon key
•
Wrench for front end driver ring
•
Screw, small (3x)
•
Washer, small (6x)
•
Spring washer (3x)
•
Nut, small (3x)
•
Screw, large (2x)
•
Washer, large (2x)
•
Wing nut (2x)
•
Washer for crank handle
•
Original operating instructions
•
Safety information

3. Intended use

The wood lathe is only designed for working on
wood using a suitable turning tool..
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: .............................. 230 V ~ 50 Hz
Power: .............................................. 350 Watt S1
Idle engine speed ...............................1,400 min
Spindle speed ............890/1260/1760/2600 min
Tip width ................................. approx. 1,000 mm
Max. lathe diameter ................................ 280 mm
Protection type: ................................................ –
Weight: ........................................................23 kg
Danger!
Noise
The noise emission values were measured in ac-
cordance with EN 62841.
Anl_TC_WW_1000_1_SPK9.indb 18 Anl_TC_WW_1000_1_SPK9.indb 18
GB
Operation
L sound pressure level ........................ 61 dB(A)
pA
K uncertainty ....................................... 3 dB (A)
pA
L sound power level .......................... 74 dB(A)
WA
K uncertainty ....................................... 3 dB (A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
The stated noise emission values were measured
in accordance with a set of standardized criteria
and can be used to compare one power tool with
another.
The stated noise emission values can also be
used to make an initial assessment of exposure.
Warning:
The noise emission levels may vary from the level
specifi ed during actual use, depending on the
way in which the power tool is used, especially
the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
-1
1. Lung damage if no suitable protective dust
-1
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 18 -
24.02.2022 13:40:20 24.02.2022 13:40:20