Hellberg Xstream Multi-Point Gebrauchsanweisung Seite 8

Parts (pic. A)
A1: Thermoplastic headband
A2: Thermoplastic helmet/cap attachment
A3: Replacable foam liner
A4: Replaceable foam filled ear cushions
A5: Replaceable foam filled head cushion
A6: Cover for microphone attachment
A7: Level Dependent microphones
A8: Charging socket
A9: Socket for boom-microphone
A10: Speech microphone
A11: LED
A12: Volume DOWN and previous track
A13: Volume UP an next track
A14: On/Off button
A15: Level dependent button
Accessories and spare parts (pic. B)
B:1. Hygiene kit: 99403-001
B:2. Sweat absorbers: 99900-001
B:3. Windshield boom microphone: 16999-001
B:4. USB charging cable: 39926-001
B:5. Boom microphone: 16982-001
B:6. Windshield level dependent microphones: 1059-001
B:7. Spare headband electronic: 26046-915
B:8. Spare helmet arm (pair): 26108-910
Changing the hygiene kit (pic. D)
1. Remove the old sound absorber foam and insert the new.
2. Pull off the old ear cushion.
3. Centre the new ear cushion over the hole.
4. Press with a finger along the outside of the ear cushion until it attaches all around the edges.
5. Pull off the old head cushion and insert the new.
Approval and technical data (E)
E:1) Headband
E:2) Helmet/Cap mounted
E:3) Tested and certified to (standards)
E:4) Weight
E:5) Mean attenuation
E:6) Standard deviation
E:7) Assumed Protection Value
E:8) Tested by (notified body)
E:9) Size: S, M & L
Approved helmet combinations
These earmuffs should be fitted to, and used only with the industrial safety helmets listed in table G.
G:1) Manufacturer
G:2) Model
G:3) Adapter
Earmuffs complying with EN 352-3 are of medium size range or small size range or large size range. Medium size range
earmuffs will fit the majority of wearers. Small size range or large size range earmuffs are designed to fit wearers for whom
medium size range earmuffs are not suitable.
Hereby, Hellberg Safety AB declares that the hearing protector "Xstream Multi-Point" is in compliance with PPE regulation
EU 2016/425 and the RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
Internet address: www.hellbergsafety.com/declaration-of-conformity
For manufacturing date, see the date clock on the inside of the ear cup. Expected lifetime of product, excluding its batteries, is 5
years. Serial number is placed on label on the bottom of the ear cup.
This product is covered by the Waste Electrical and Electronic Equipment Directive (WEEE) 2012/19/EU.
Do not dispose of your product as unsorted municipal waste. Batteries must be disposed of in accordance with national
regulations. Use local recycling system for electronic products.
8