Dometic MPC01 Plus Montage- Und Bedienungsanleitung Seite 23

MPC01 Plus
Changing values
➤ Press the selector button so the value can be changed.
➤ Turn the selector button to set the required value.
➤ Press the selector button to save the value.
When values are being changed, an arrow appears (fig. 7 1, page 7).
➤ Turn the selector button to mark the arrow.
➤ Press the selector button to exit setting mode.
➤ Turn the selector button until the message "Press to return" appears and then press the
selector button.
✓ This will return you to the "Main menu".
Changing system settings
➤ Navigate to the "System settings" menu page (page 21), see chapter "Navigating within the
menu" on page 19.
➤ Set the values for:
– Date and time
– Alarm
➤ Press the selector button.
➤ Turn the selector button to access the relevant parameter.
➤ Press the selector button and turn it to set the required value.
➤ Confirm the value by pressing the selector button.
Reading battery values
➤ Navigate to the menu page for the battery required, see chapter "Navigating within the menu"
on page 19.
Changing the settings for batteries A and B
➤ Navigate to the "Menu battery parameters" menu (page 21), see chapter "Navigating within
the menu" on page 19.
➤ Navigate to the menu page for the battery required.
➤ Press the selector button to access setting mode.
Define the capacity and type for each connected battery.
➤ Turn the selector button to mark the value to change.
➤ Set the required value, see chapter "Changing values" on page 23.
Reading charger information and changing settings
➤ Navigate to the "Battery charger" menu page (page 20), see chapter "Navigating within the
menu" on page 19.
➤ Press the selector button to access setting mode.
➤ Turn the selector button to mark the value to change.
➤ Set the required value, see chapter "Changing values" on page 23.
EN
Operating the system
23